where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
213 views
Technical Discussions
Peter
Peter
21:50 Feb-11-2020
Spraying Penetrant

Can someone recommend some spray guns for fluorescent penetrant?

I'm using the Binks Model 2100 and I'm getting a poor spray patter and leaking.

Thanks

 
 Reply 
 
Diego Nicolás
Universidad Industrial de Santander, Colombia, Joined Feb 2020, 2

Diego Nicolás

Universidad Industrial de Santander,
Colombia,
Joined Feb 2020
2
18:31 Feb-15-2020
Re: Spraying Penetrant
In Reply to Peter at 21:50 Feb-11-2020 (Opening).

Hey, check out the Magnaflux products!


https://www.magnaflux.com/Products/Penetrant-Testing-Applicators.htm

 
 Reply 
 
Paul Brubaker
Aerocet, USA, Joined May 2018, 1

Paul Brubaker

Aerocet,
USA,
Joined May 2018
1
15:46 Feb-18-2020
Re: Spraying Penetrant
In Reply to Peter at 21:50 Feb-11-2020 (Opening).

The Binks you are using should be fine. If you're having problems, clean it carefully, and experiment with slightly different penetrant and air feed pressures, as well as the gun needle and jet, you should be able to get the material volume and spray pattern you are looking for. Good luck!

 
 Reply 
 

Product Spotlight

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Varex Imaging Large Field of View (FOV) Digital Detector Arrays (DDAs)

A larger FOV DDA can reduce the space and volume of the X-ray inspection system on the factory floor
...
, enable faster scanning times, better throughput and better resolution images at a lower dose. Customers can also save time and money. With these benefits in mind, Varex Imaging has designed a family of large FOV detectors (4343HE, XRD 1611, 4343DX-I, 4343CT) for our industrial imaging customers.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window