where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1504 views
Technical Discussions
Nick Welland
Other, Quality and NDT
Aben Technical Services, Australia, Joined Oct 1999, 42

Nick Welland

Other, Quality and NDT
Aben Technical Services,
Australia,
Joined Oct 1999
42
04:07 Dec-02-2004
Boiler Tube Inspection

Can anyone suggest a method of inspection for ferritic steel boiler tubes, in a fire tube boiler with access to fire side (tube I.D.) only. Material excessively noisy with RFET and flooding is not permitted.


    
 
 Reply 
 
Rich Roberts
Engineering, Executive Managment
Quest Integrity Group, USA, Joined Nov 1998, 78

Rich Roberts

Engineering, Executive Managment
Quest Integrity Group,
USA,
Joined Nov 1998
78
03:18 Dec-02-2004
Re: Boiler Tube Inspection
Good Day Nick,

LOTIS which is a "laser based" inspection method has been applied to boiler tubes for nearly 20 years. This method does not care what the material type is and is not effected by any external attachements (i.e. fins, etc.). Please let me know if you would like more information.

Regards, Rich Roberts
Condition Assessment Division
Quest TruTec LP
1012 Central Avenue South
Kent, Washington 98032
USA

Tel: 1-253-872-9500, Ext 1275
Toll Free 1-800-233-3345, Ext 1275
Mobile/Cell: 1-206-571-4302
Fax 1-253-872-8967
Email: richardr@QuestTruTec.com
Web Site: http://www.questtrutec.com

----------- Start Original Message -----------
: Can anyone suggest a method of inspection for ferritic steel boiler tubes, in a fire tube boiler with access to fire side (tube I.D.) only. Material excessively noisy with RFET and flooding is not permitted.
------------ End Original Message ------------




    
 
 Reply 
 
Ingo Becker
Engineering, NDT Inspector & Sales
ec-works GmbH, Germany, Joined Apr 2000, 30

Ingo Becker

Engineering, NDT Inspector & Sales
ec-works GmbH,
Germany,
Joined Apr 2000
30
08:54 Dec-03-2004
Re: Boiler Tube Inspection
Hello Nick,

what type of defects are expected? You are looking for pitting corrosion, cracks or erosional defects? We are eddy current experts and have carried out serveral
types of inspection without using RFET! Please tell us something about the dimensions to make any special recommendations.

Best regards

Ingo Becker
ET Level III Engineer

ec-works GmbH
Maschweg 5
D-29227 Celle
Germany
Fon: +49 (0)5141-802187
Fax: +49 (0)5141-802164
e-mail: info@ec-works-celle.de


----------- Start Original Message -----------
: Can anyone suggest a method of inspection for ferritic steel boiler tubes, in a fire tube boiler with access to fire side (tube I.D.) only. Material excessively noisy with RFET and flooding is not permitted.
------------ End Original Message ------------




    
 
 Reply 
 
Sunil Ramchandran
Sunil Ramchandran
07:27 Dec-03-2004
Re: Boiler Tube Inspection
I have a question about the LOTUS method: Does it detect any defects that may be on the tube OD? I was under the impression that it only finds ID defects.

Thank you.


---------- Start Original Message -----------
: Good Day Nick,
: LOTIS which is a "laser based" inspection method has been applied to boiler tubes for nearly 20 years. This method does not care what the material type is and is not effected by any external attachements (i.e. fins, etc.). Please let me know if you would like more information.
: Regards, Rich Roberts
: Condition Assessment Division
: Quest TruTec LP
: 1012 Central Avenue South
: Kent, Washington 98032
: USA
: Tel: 1-253-872-9500, Ext 1275
: Toll Free 1-800-233-3345, Ext 1275
: Mobile/Cell: 1-206-571-4302
: Fax 1-253-872-8967
: Email: richardr@QuestTruTec.com
: Web Site: http://www.questtrutec.com
: : Can anyone suggest a method of inspection for ferritic steel boiler tubes, in a fire tube boiler with access to fire side (tube I.D.) only. Material excessively noisy with RFET and flooding is not permitted.
------------ End Original Message ------------




    
 
 Reply 
 
ruben t. diverson jr
ruben t. diverson jr
01:38 Apr-26-2005
Re: Boiler Tube Inspection (computing/knowing the minimum thickness of boiler tubes)
----------- Start Original Message -----------
: Hello Nick,
: what type of defects are expected? You are looking for pitting corrosion, cracks or erosional defects? We are eddy current experts and have carried out serveral
: types of inspection without using RFET! Please tell us something about the dimensions to make any special recommendations.
: Best regards
: Ingo Becker
: ET Level III Engineer
: ec-works GmbH
: Maschweg 5
: D-29227 Celle
: Germany
: Fon: +49 (0)5141-802187
: Fax: +49 (0)5141-802164
: e-mail: info@ec-works-celle.de
:
: : sir,
Can you suggest a method in computing or your recommend practice in computing the minimum thickness of boiler tubes?I am a student here at the philippines which my study is in inspection/NDT of boiler tubes.Pls help me regarding to this subject.thank you and hoping you will help me regarding to my study report.
------------ End Original Message ------------




    
 
 Reply 
 

Product Spotlight

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

CIVA 2017 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window