where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Volume Graphics GmbH
By choosing Volume Graphics software, you can rely on more than 20 years of experience in the development of software for non-destructive testi ...
787 views
Technical Discussions
mani
Engineering, Inspection Engineer
Qatarpetroleum refining division, Qatar, Joined Sep 2002, 7

mani

Engineering, Inspection Engineer
Qatarpetroleum refining division,
Qatar,
Joined Sep 2002
7
09:36 Oct-15-2003
Australian qualifications

Hello can anyone guide me to acquire the welding inspection and static equipment inspection (Plant inspector) in australia. I am looking for a possible migration and hence i want to know the details for exams, training institute, certification body.
iam presently working in oilrefinery related weld inspectiona dn static equipment.


 
 Reply 
 
Mike Trinidad
Consultant,
LMATS Pty Ltd , Australia, Joined Jan 2003, 141

Mike Trinidad

Consultant,
LMATS Pty Ltd ,
Australia,
Joined Jan 2003
141
03:55 Oct-16-2003
Re: Australian qualifications
G'Day Mani

The NDT certification body in Australia is AINDT (Australian Institute of NDT) http://www.aindt.com.au/newsite/

The Welding Inspectors are WTIA (Welding Institute of Australia) http://www.wtia.com.au/

Pressure vessels are done to ACIP

API qualifications are becoming popular also.

Regards

Mike Trinidad
----------- Start Original Message -----------
: Hello can anyone guide me to acquire the welding inspection and static equipment inspection (Plant inspector) in australia. I am looking for a possible migration and hence i want to know the details for exams, training institute, certification body.
: iam presently working in oilrefinery related weld inspectiona dn static equipment.
------------ End Original Message ------------




 
 Reply 
 
Arnold Parada Olhagaray
Arnold Parada Olhagaray
04:15 Dec-06-2004
Finding job.
----------- Start Original Message -----------
: Hello my name ir Arnold I`m 20 years experience in small planta supervision,especially DFS (diesel fuel system) with any Therminols heater or separator gas-oil plants, I`m loocking a job any place in the world,like plant operator or same.
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window