where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

AT-Automation Technology GmbH
AT -Automation Technology is a systems house for industrial image processing. AT offers thermographic ndt systems as well as high-speed 3D sensors.

484 views
Virtual Showroom
Sylvain
Sylvain
18:47 Mar-24-2020
Telops - Webinar Invitation - April 30th, 2020

Posted by TELOPS

Hi everyone,
If you want to learn more about IR Active Thermography, you're cordially invited to join the following webinar. Note, recording will be provided (pptx as well), if you register.

Analysis of Ballistic Impacts on Composite Materials by Infrared Active Thermography

This webinar will focus on the assessment of the damaged area on composites ballistic plates subjected to high velocity impact. Active pulsed thermography technique was used for performing post-mortem analysis of the impacted specimens. The post-mortem analysis was combined with inputs of the velocity of the projectile, the absorbed energy to evaluate how efficient the material is at spreading the absorbed energy to a large area.

Click on the link below if you want to register:
attendee.gotowebinar.com/....

1
 
 Reply 
 
J.B.
J.B.
22:13 Mar-24-2020
Re: Telops - Webinar Invitation - April 30th, 2020
In Reply to Sylvain at 18:47 Mar-24-2020 (Opening).

I wonder who is behind this webinar.
With more than 30 years experience in IRT Testing iAerospace as well in R&D and IRT equipment development, I ask myself, who can tell really something new
If you tell me which equipment you are using, ( TWI, EDEVIS, AT AUTOMATION TECHNOLOGY ...) I could estimate, what direction you work. I ask myself, how much real experience you have with large scale industrial application, Have you been involved inspection proceduere development of commercial aircrafts? Usually the task are low velocity high energy imtacts from ground equipment or tire burst mpacts on cfrp ing skins or fuselage.

I would more focus on thermosonics to assess impacts. So LDR methods or comparable aproaches.

So what is your background & experience to offer IRT trainig?

1
 
 Reply 
 
Sylvain
Sylvain
13:05 Mar-26-2020
Re: Telops - Webinar Invitation - April 30th, 2020

Posted by Telops Inc. In Reply to J.B. at 22:13 Mar-24-2020 .

Dear,
Thank you for your interest.
This webinar will be an experience sharing and an opportunity to learn for us and the attendees, so your 30 years experiences will definitely be beneficial and we would greatly appreciate you attending.
Behind the Webinar there is Telops. We have been in the Infrared thermography business since 20 years, design and manufacturing thermal infrared hyperspectral solutions, and high end multispectral and broadband Infrared thermography solutions.
In active thermography we propose a variety of solutions: Optical Lockin, Plused Phase, Laser-induced, Inductive, Ultrasound Lockin Thermography and also Shearography for non-destructive testing.
In the webinar we will show some examples of inspections results done on fuselage and other aircrafts parts, monocoque etc….
If you have aircraft inspection project, we will be very happy to discuss a testing approach with you.

1
 
 Reply 
 
Fernando Lopez
Canada, Joined Mar 2015, 1

Fernando Lopez

Canada,
Joined Mar 2015
1
18:16 Mar-26-2020
Re: Telops - Webinar Invitation - April 30th, 2020
In Reply to J.B. at 22:13 Mar-24-2020 .

Hi Mr. ...
I can acknowledge the expertise and background of TELOPS in the field of IR imaging - including multi and hyper-spectral imaging. I have worked with them before and I could note their professionalism and their capabilities to deliver leading-edge solutions.
If you have more than 30 years working in that field, you would agree that the technology is in constant evolution and there is always new stuff to learn. I would encourage you to participate in the webinar and perhaps, share your expertise.

 
 Reply 
 

Product Spotlight

GUL Subsea Solutions - Screeening & Monitoring

To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
...
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
>

MANTIS

MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
...
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window