where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
424 views
Technical Discussions
Phil Malone
Phil Malone
06:01 Dec-14-2004
Ultrasonic propagation along sheet steel.

Hi.

Has anyone seen any papers/studies/equipment related to transmitting ultrasonics along steel plate (1/2" to 1" thick).

I'm specifically thinking a *large* steel storage tank.

I want to inject a signal at one point on the tank and measure the signal at various other points on the tank.

I'm looking for any info/products that relate to fixed transmit 'ducers, movable receive 'ducers, signal attenuation, power levels etc.

Examples of practical components would be FANTASTIC.

Thanks....



 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 304

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
304
01:07 Dec-16-2004
Re: Ultrasonic propagation along sheet steel.
----------- Start Original Message -----------
: Hi.
: Has anyone seen any papers/studies/equipment related to transmitting ultrasonics along steel plate (1/2" to 1" thick).
: I'm specifically thinking a *large* steel storage tank.
: I want to inject a signal at one point on the tank and measure the signal at various other points on the tank.
: I'm looking for any info/products that relate to fixed transmit 'ducers, movable receive 'ducers, signal attenuation, power levels etc.
: Examples of practical components would be FANTASTIC.
: Thanks....
------------ End Original Message ------------

Hi,
Sounds like you need to be looking at Guided Waves Ultrasonics in this application.
Guided waves can propagate along plates (and pipes) for hundreds of feet, and can detect defects typically with a single number of percent of wall thickness reduction.
The waves travel through (butt) welds (but will have difficulty on lap welds on tank floors)
Please contact me and we can give you more information about this.

Godfrey Hands
Godfrey@ndt-consultants.co.uk


 
 Reply 
 

Product Spotlight

Surf-X® Array Probe

Introducing the Surf-X family of flexible Eddy Current Array (ECA) probes. Featuring unique multiple
...
coil sets and proprietary X-PROBE technology, Surf-X array probes can quickly and accurately handle a range of inspection applications, from inspecting corrosion or cracking in pipes, pressure vessels, or tanks, to assessing and sizing cracks in raised welds and friction stir welds.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window