where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Modsonic Instruments Mfg Co Pvt Ltd
We are leading Indian manufacturer and exporter of portable “Ultrasonic Testing Equipment” offering comprehensive range of Ultrasonic Fla ...
142 views
Technical Discussions
Raul Rios
NDT Inspector,
Ensayos Predictivos SAS, Colombia, Joined May 2020, 2

Raul Rios

NDT Inspector,
Ensayos Predictivos SAS,
Colombia,
Joined May 2020
2
18:45 May-16-2020
Drivers DMS2 for Window 10

Hi everybody!
My DMS 2 GE instrument cannot communicate with Window 10 to download measurement data.
Do any of you know if there is a driver to communicate with Window 10?
I only have the factory drivers for Window XP.
I await your kind comments!
Sincerely,
Raul Rios

 
 Reply 
 
Rick Cahill
Rick Cahill
21:59 May-18-2020
Re: Drivers DMS2 for Window 10
In Reply to Raul Rios at 18:45 May-16-2020 (Opening).

Hi Raul,

You can get what you need from Waygate Technologies.
You will need a cable, part number 114M2233. Drivers for this cable are available direct from the chip manufacturer for the part used in the cable at: http://www.ftdichip.com/Drivers/D2XX.htm. At the right side of the Windows line of the drivers chart is a link called “Available as a setup executable”. This is the most convenient way to install the drivers. Please run this before plugging the cable in for the first time. If you need further assistance you can email us at RemoteService@BakerHughes.com.

Regards,
Rick

 
 Reply 
 
Raul Rios R
NDT Inspector,
Ensayos Predictivos SAS, Colombia, Joined May 2020, 2

Raul Rios R

NDT Inspector,
Ensayos Predictivos SAS,
Colombia,
Joined May 2020
2
22:53 May-18-2020
Re: Drivers DMS2 for Window 10
In Reply to Rick Cahill at 21:59 May-18-2020 .

Thank a lot Rick for yor imput!!
I will try for this driver.

Regards

Raul Rios

 
 Reply 
 

Product Spotlight

Echomac® PA Bar Tester

The Echomac® PA BT provides 100% inspection of round bars for core and surface defects, at speeds u
...
p to 2 m/sec, depending on the specific application. The unit allows producers to handle a much larger range of diameters in one installation, and is available in 3 models to test 10 – 75mm diameter (small model); 20 – 130mm (medium model) or 50 – 254mm (large model) bars.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window