where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Zawada NDT
Suppliers of instruments to test steel wire ropes in-situ, using magnetic, non-destructive method.

Virtual Showroom
Wayne Waxman
Wayne Waxman
21:24 Jul-10-2020
On-Demand Webinar: Using ECA in Lieu of MT & PT for large area screenings

Posted by Zetec

This webinar will highlight how ECA is ideal for large surface areas and complex geometries. The webinar takes about 45 minutes to complete and includes the following topics:

•An introduction to the various technologies including Eddy Current Array (ECA) along with advantages and disadvantages of each

•Side by side examples using ECA versus PT or MT across a range of inspection applications including aircraft stringers, engine blades, forgings, weld plates and more

•The operational and productivity gains when technicians use ECA in lieu of PT or MT in those specific applications

The webinar will give decision makers and technicians a deeper understanding of ECA technology and inspection implementation recommendations across a range of applications.

The webinar is currently open for viewing at: https://attendee.gotowebinar.com/register/3088745173122542351?source=ndt.net


Product Spotlight

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).

We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
this is debug window