where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1201 views
Technical Discussions
ANDRES GOMEZ
ANDRES GOMEZ
08:02 Feb-01-2005
TOFD TRAINING

Thanks Ethan for your suggestion abour Mr Davis.


Dear colleagues:

What I.m looking for, it is what is TOFD method, its diferences with traditional UT, and what is TOFD used for.
I grate responses or information about where or how I caninform myself about it.

Thanks colleagues




 
 Reply 
 
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
00:06 Feb-01-2005
Re: TOFD TRAINING
Maybe we can help you, but can you be more specific?
What are the purpose of your application? Maintenance, construction or research?
Do you need to inspect some specific component?

regards
Cesar

----------- Start Original Message -----------
: Thanks Ethan for your suggestion abour Mr Davis.
:
: Dear colleagues:
: What I.m looking for, it is what is TOFD method, its diferences with traditional UT, and what is TOFD used for.
: I grate responses or information about where or how I caninform myself about it.
: Thanks colleagues
------------ End Original Message ------------




 
 Reply 
 
Jan Verkooijen
Director,
Sonovation, Netherlands, Joined Nov 1998, 29

Jan Verkooijen

Director,
Sonovation,
Netherlands,
Joined Nov 1998
29
08:22 Feb-03-2005
Re: TOFD TRAINING
We have been working with TOFD for over 15 years now, producing equipment, performing site inspections, and delivering accredited training. Please have a look at our website, www.sonovation.com for more info about TOFD! You can also find a detailed article on pro-s and cons of TOFD on there or mail me for the latest revision.

Best regards,

Jan Verkooijen

----------- Start Original Message -----------
: Maybe we can help you, but can you be more specific?
: What are the purpose of your application? Maintenance, construction or research?
: Do you need to inspect some specific component?
: regards
: Cesar
: : Thanks Ethan for your suggestion abour Mr Davis.
: :
: : Dear colleagues:
: : What I.m looking for, it is what is TOFD method, its diferences with traditional UT, and what is TOFD used for.
: : I grate responses or information about where or how I caninform myself about it.
: : Thanks colleagues
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)

Download our white paper on Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)
...
Using 3D VSHARP, a fast GPU-Based Linear Boltzmann Transport Equation Solver here: http://bit.ly/2Y0t78P
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window