where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1095 views
Technical Discussions
ANDRES GOMEZ
ANDRES GOMEZ
08:02 Feb-01-2005
TOFD TRAINING

Thanks Ethan for your suggestion abour Mr Davis.


Dear colleagues:

What I.m looking for, it is what is TOFD method, its diferences with traditional UT, and what is TOFD used for.
I grate responses or information about where or how I caninform myself about it.

Thanks colleagues




 
 Reply 
 
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
00:06 Feb-01-2005
Re: TOFD TRAINING
Maybe we can help you, but can you be more specific?
What are the purpose of your application? Maintenance, construction or research?
Do you need to inspect some specific component?

regards
Cesar

----------- Start Original Message -----------
: Thanks Ethan for your suggestion abour Mr Davis.
:
: Dear colleagues:
: What I.m looking for, it is what is TOFD method, its diferences with traditional UT, and what is TOFD used for.
: I grate responses or information about where or how I caninform myself about it.
: Thanks colleagues
------------ End Original Message ------------




 
 Reply 
 
Jan Verkooijen
Director,
Sonovation, Netherlands, Joined Nov 1998, 29

Jan Verkooijen

Director,
Sonovation,
Netherlands,
Joined Nov 1998
29
08:22 Feb-03-2005
Re: TOFD TRAINING
We have been working with TOFD for over 15 years now, producing equipment, performing site inspections, and delivering accredited training. Please have a look at our website, www.sonovation.com for more info about TOFD! You can also find a detailed article on pro-s and cons of TOFD on there or mail me for the latest revision.

Best regards,

Jan Verkooijen

----------- Start Original Message -----------
: Maybe we can help you, but can you be more specific?
: What are the purpose of your application? Maintenance, construction or research?
: Do you need to inspect some specific component?
: regards
: Cesar
: : Thanks Ethan for your suggestion abour Mr Davis.
: :
: : Dear colleagues:
: : What I.m looking for, it is what is TOFD method, its diferences with traditional UT, and what is TOFD used for.
: : I grate responses or information about where or how I caninform myself about it.
: : Thanks colleagues
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

XRHRobotStar

In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
...
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Research and Applications Development For NDT

The Research and Applications Development (RAD) group is a newly formed team within Acuren dedicat
...
ed to tackling challenging inspection problems. Our focus is the development of novel, field deployable, advanced inspection techniques for use in cases where standard NDT methods are ineffective. We don't wait for new innovations, we engineer them. From concept to commissioning.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window