where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1757 views
Technical Discussions
Fred Raco, Jr
Consultant,
RNDT, Inc., USA, Joined Jul 2002, 24

Fred Raco, Jr

Consultant,
RNDT, Inc.,
USA,
Joined Jul 2002
24
03:53 Feb-27-2004
UT & RT inspection of butt fusion welds in PVC pipe

We are in the process of starting a research program evaluating butt fused PVC pipe welds. We have located some information already but could use more prior to the start of the project. Is there any information out there that could assist us? Thanks in advance for your help.

Regards,

Fred Raco, Jr.


 
 Reply 
 
Mike Troughton
Mike Troughton
05:15 Mar-01-2004
Re: UT & RT inspection of butt fusion welds in PVC pipe
We have been carrying out research into UT and RT inspection of butt fusion welds in PE pipes for around 15 years and have published many papers on the subject, e.g.

Troughton M J: "Welding with integrated non-destructive examination of polyethylene pipes". Plastics Pipes XI Conference, Munich, Germany, 3-6 September 2001.

Munns I J and Georgiou G A: "Ultrasonic and radiographic NDT of butt fusion welded polyethylene pipes", Insight 41(5), 291.

We are also currently developing new NDT techniques for both butt fusion and electrofusion welds in PE pipes.

PVC pipes are rarely butt fusion welded. They are normally joined using a solvent cement. However, if you are indeed looking to carry out NDT on PVC butt fusion welds, then these papers would be a good starting point.

----------- Start Original Message -----------
: We are in the process of starting a research program evaluating butt fused PVC pipe welds. We have located some information already but could use more prior to the start of the project. Is there any information out there that could assist us? Thanks in advance for your help.
: Regards,
: Fred Raco, Jr.
------------ End Original Message ------------




 
 Reply 
 
ams_ati
ams_ati
08:05 Nov-21-2004
Re: UT RT inspection of butt fusion welds in PVC pipe
i need some information about ndt ( specialy new ndt methods ) in inspection of electrofusion welds in PVC pipe. i'm student of mechanical engineering.
thanks----------- Start Original Message -----------
: We are in the process of starting a research program evaluating butt fused PVC pipe welds. We have located some information already but could use more prior to the start of the project. Is there any information out there that could assist us? Thanks in advance for your help.
: Regards,
: Fred Raco, Jr.
------------ End Original Message ------------





 
 Reply 
 
M. Biglar
M. Biglar
06:35 Feb-06-2005
Re: UT RT inspection of butt fusion welds in PVC pipe
----------- Start Original Message -----------
: We are in the process of starting a research program evaluating butt fused PVC pipe welds. We have located some information already but could use more prior to the start of the project. Is there any information out there that could assist us? Thanks in advance for your help.
: Regards,
: Fred Raco, Jr.
------------ End Original Message ------------

I am a student at mechanical Eng. and start a project about pe pipe joint inspection with N D T method please guide me about this method.
Thanks for your attention



 
 Reply 
 
Udo Schlengermann
Consultant, -
Standards Consulting, Germany, Joined Nov 1998, 182

Udo Schlengermann

Consultant, -
Standards Consulting,
Germany,
Joined Nov 1998
182
06:54 Feb-09-2005
Re: UT RT inspection of butt fusion welds in PVC pipe
as in Feb 2005 the request for UT of welds in PVC pipe appeared again in this forum, a useful information for all readers:

Active from November 2004 there is a new European Standard:
EN 13100-3
Nondestructive testing of welded joints in thermoplastics semi-finished products -
Part 3: Ultrasonic testing

Kind regards
Udo Schlengermann
GE Inspection Technologies GmbH
Huerth, Germany

----------- Start Original Message -----------
: : We are in the process of starting a research program evaluating butt fused PVC pipe welds. We have located some information already but could use more prior to the start of the project. Is there any information out there that could assist us? Thanks in advance for your help.
: : Regards,
: : Fred Raco, Jr.
: I am a student at mechanical Eng. and start a project about pe pipe joint inspection with N D T method please guide me about this method.
: Thanks for your attention
------------ End Original Message ------------





 
 Reply 
 
marjan
marjan
07:55 Sep-17-2005
Re: UT RT inspection of butt fusion welds in PVC pipe
------ Dear sirs
We are a group of employees of National iranian Gas
company(N.IG.C).Polyethylene pipes are used in the gas distribution system
of Iran and we are seeking to provide coupler for electrofusion joints.Our
main problem is joint inspection.Please kindly let us know the answer of the
following questions:

1-what are the inspection methods for electrofusion joints and which
one is preferred?

2-Does NDT "non destructive test"method exist for joint inspection
and if so,what are the equipments and standards and expenses.

3-Does NDT method provide inspection and confirmation the quality
lonely or the DT and NDT should be carried out simultaneously.


Sincerely yours

M.yousefi

----- Start Original Message -----------
: We have been carrying out research into UT and RT inspection of butt fusion welds in PE pipes for around 15 years and have published many papers on thesubject, e.g.
: Troughton M J: "Welding with integrated non-destructive examination of polyethylene pipes". Plastics Pipes XI Conference, Munich, Germany, 3-6 September 2001.
: Munns I J and Georgiou G A: "Ultrasonic and radiographic NDT of butt fusion welded polyethylene pipes", Insight 41(5), 291.
: We are also currently developing new NDT techniques for both butt fusion and electrofusion welds in PE pipes.
: PVC pipes are rarely butt fusion welded. They are normally joined using a solvent cement. However, if you are indeed looking to carry out NDT on PVC butt fusion welds, then these papers would be a good starting point.
: : We are in the process of starting a research program evaluating butt fused PVC pipe welds. We have located some information already but could use more prior to the start of the project. Is there any information out there that could assist us? Thanks in advance for your help.
: : Regards,
: : Fred Raco, Jr.
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window