where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
779 views
Technical Discussions
steve hornby
NDT Inspector, NDT Manager
BAE SYSTEMS, SUBMARINES, United Kingdom, Joined Nov 2003, 4

steve hornby

NDT Inspector, NDT Manager
BAE SYSTEMS, SUBMARINES,
United Kingdom,
Joined Nov 2003
4
02:16 Dec-01-2003
digital radiography of welding

I have recently hired an Agfa Rad View system with an aim to developing radiographic techniques for pipewelds. Has anybody as yet managed to achieve the required 2% IQI sensitivity with Digital Radiography using flexible imaging plates


 
 Reply 
 
Dennis Lee
Director, Vice President of Operations
US Inspection Services, USA, Joined Feb 2000, 2

Dennis Lee

Director, Vice President of Operations
US Inspection Services,
USA,
Joined Feb 2000
2
06:47 Dec-02-2003
Re: digital radiography of welding
We have been successful using the Fuji Dynamix 4 CR System. We have shot the Agfa system side by side with the Fuji System. We were not able to pull the 2-2T hole using the Agfa system. Agfa may be able to tweak their menus to help you a bit. If it's not to late take a look at the Fuji system. We now own 4 of the Fuji systems and are very pleased with their performance. If I can help you in anyway please feel free to contact me at dennis.lee@usinspection.com or (937) 228-9729.
----------- Start Original Message -----------
: I have recently hired an Agfa Rad View system with an aim to developing radiographic techniques for pipewelds. Has anybody as yet managed to achieve the required 2% IQI sensitivity with Digital Radiography using flexible imaging plates
------------ End Original Message ------------




 
 Reply 
 
WAJID ALI SHAH
WAJID ALI SHAH
00:27 Mar-08-2004
Re: digital radiography of welding
pl send me catalog/information on welding radiography.



 
 Reply 
 
ahmed hamdy
ahmed hamdy
03:43 Feb-27-2005
Re: digital radiography of welding
hi
please send me any papaers concerned in welding inspection using nondestructive tests
thank u


 
 Reply 
 
Vladimir LApos
Vladimir LApos
02:54 Jan-08-2007
Re: digital radiography of welding
----------- Start Original Message -----------
: I have recently hired an Agfa Rad View system with an aim to developing radiographic techniques for pipewelds. Has anybody as yet managed to achieve the required 2% IQI sensitivity with Digital Radiography using flexible imaging plates
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Research and Applications Development For NDT

The Research and Applications Development (RAD) group is a newly formed team within Acuren dedicat
...
ed to tackling challenging inspection problems. Our focus is the development of novel, field deployable, advanced inspection techniques for use in cases where standard NDT methods are ineffective. We don't wait for new innovations, we engineer them. From concept to commissioning.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window