where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Hi-Spec Systems
we are specialised in the design, development and manufacture of Phased Array and Time-of-Flight Diffraction (ToFD) ultrasonic inspection systems.
303 views
Technical Discussions
R. Gopal
R. Gopal
08:42 Mar-07-2005
Re: Bimetallic Tube Inspection

with real authenticity for the above achievemnt of results shall contact me also.

Thanks & regards

R. Gopal


:
Dear All,
.
: We have a HP. Stripper in Urea Plant licensed by Snaphrogetti which have tubes made from bimetallic material ( Stainless steel + Zr ). Any of you could inform me the best method to be used to inspect the internal of that tube ? Thank you.
.


--
This message was posted into the NDT.net Forum.
http://www.ndt.net/wshop/forum/forum-1.htm
Please do not reply to email: forum@ndt.net
For your reply to this message go to:
http://www.ndt.net/wshop/forum/messages-1/8044.html


 
 Reply 
 
Simon Amallraja
Simon Amallraja
06:13 Mar-08-2005
Re: Bimetallic Tube Inspection
lay 25-22-2 surface corrosion due to "Active" attack to be assessed.
: NDT personnel with real authenticity for the above achievemnt of results shall contact me also.
: Thanks & regards
: R. Gopal
:
: :
: Dear All,
: .
: : We have a HP. Stripper in Urea Plant licensed by Snaphrogetti which have tubes made from bimetallic material ( Stainless steel + Zr ). Any of you could inform me the best method to be used to inspect the internal of that tube ? Thank you.
: .
:
: --
: This message was posted into the NDT.net Forum.
: http://www.ndt.net/wshop/forum/forum-1.htm
: Please do not reply to email: forum@ndt.net
: For your reply to this message go to:
: http://www.ndt.net/wshop/forum/messages-1/8044.html
------------ End Original Message ------------

Dear Mr.Gopal,

We represent Zetec Inc, USA for their entire product ranges in India. They are the World Leaders in Eddy Current Instrumnets and Systems. If you can give your contact no and address, we willgetin touch with you and help you to solve the problem, with the help of our Principals ZETEC, USA.

Simon Amallraja.
Mobile: 098663 43309. Contact me for further info.


 
 Reply 
 

Product Spotlight

XRHRobotStar

In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
...
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window