where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
302 views
Technical Discussions
R. Gopal
R. Gopal
08:42 Mar-07-2005
Re: Bimetallic Tube Inspection

with real authenticity for the above achievemnt of results shall contact me also.

Thanks & regards

R. Gopal


:
Dear All,
.
: We have a HP. Stripper in Urea Plant licensed by Snaphrogetti which have tubes made from bimetallic material ( Stainless steel + Zr ). Any of you could inform me the best method to be used to inspect the internal of that tube ? Thank you.
.


--
This message was posted into the NDT.net Forum.
http://www.ndt.net/wshop/forum/forum-1.htm
Please do not reply to email: forum@ndt.net
For your reply to this message go to:
http://www.ndt.net/wshop/forum/messages-1/8044.html


 
 Reply 
 
Simon Amallraja
Simon Amallraja
06:13 Mar-08-2005
Re: Bimetallic Tube Inspection
lay 25-22-2 surface corrosion due to "Active" attack to be assessed.
: NDT personnel with real authenticity for the above achievemnt of results shall contact me also.
: Thanks & regards
: R. Gopal
:
: :
: Dear All,
: .
: : We have a HP. Stripper in Urea Plant licensed by Snaphrogetti which have tubes made from bimetallic material ( Stainless steel + Zr ). Any of you could inform me the best method to be used to inspect the internal of that tube ? Thank you.
: .
:
: --
: This message was posted into the NDT.net Forum.
: http://www.ndt.net/wshop/forum/forum-1.htm
: Please do not reply to email: forum@ndt.net
: For your reply to this message go to:
: http://www.ndt.net/wshop/forum/messages-1/8044.html
------------ End Original Message ------------

Dear Mr.Gopal,

We represent Zetec Inc, USA for their entire product ranges in India. They are the World Leaders in Eddy Current Instrumnets and Systems. If you can give your contact no and address, we willgetin touch with you and help you to solve the problem, with the help of our Principals ZETEC, USA.

Simon Amallraja.
Mobile: 098663 43309. Contact me for further info.


 
 Reply 
 

Product Spotlight

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

Surf-X® Array Probe

Introducing the Surf-X family of flexible Eddy Current Array (ECA) probes. Featuring unique multiple
...
coil sets and proprietary X-PROBE technology, Surf-X array probes can quickly and accurately handle a range of inspection applications, from inspecting corrosion or cracking in pipes, pressure vessels, or tanks, to assessing and sizing cracks in raised welds and friction stir welds.
>

Lyft™: Pulsed Eddy Current Reinvented

PEC Reinvented—CUI Programs Redefined Corrosion under insulation (CUI) is possibly the greatest u
...
nresolved asset integrity problem in the industry. Current methods for measuring wall thickness with liftoff, without removing insulation, all have severe limitations. Eddyfi introduces Lyft — a reinvented, high-performance pulsed eddy current (PEC) solution. The patent- pending system features a state-of-the-art portable instrument, real- time C-scan imaging, fast data acquisition with grid-mapping and dynamic scanning modes, and flexibility with long cables. It can also scan through thick metal and insulation, as well as aluminum, stainless steel, and galvanized steel weather jackets. Who else but Eddyfi to reinvent an eddy current technique and redefine CUI programs. Got Lyft?
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window