where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
329 views
Technical Discussions
R. Gopal
R. Gopal
08:42 Mar-07-2005
Re: Bimetallic Tube Inspection

with real authenticity for the above achievemnt of results shall contact me also.

Thanks & regards

R. Gopal


:
Dear All,
.
: We have a HP. Stripper in Urea Plant licensed by Snaphrogetti which have tubes made from bimetallic material ( Stainless steel + Zr ). Any of you could inform me the best method to be used to inspect the internal of that tube ? Thank you.
.


--
This message was posted into the NDT.net Forum.
http://www.ndt.net/wshop/forum/forum-1.htm
Please do not reply to email: forum@ndt.net
For your reply to this message go to:
http://www.ndt.net/wshop/forum/messages-1/8044.html


 
 Reply 
 
Simon Amallraja
Simon Amallraja
06:13 Mar-08-2005
Re: Bimetallic Tube Inspection
lay 25-22-2 surface corrosion due to "Active" attack to be assessed.
: NDT personnel with real authenticity for the above achievemnt of results shall contact me also.
: Thanks & regards
: R. Gopal
:
: :
: Dear All,
: .
: : We have a HP. Stripper in Urea Plant licensed by Snaphrogetti which have tubes made from bimetallic material ( Stainless steel + Zr ). Any of you could inform me the best method to be used to inspect the internal of that tube ? Thank you.
: .
:
: --
: This message was posted into the NDT.net Forum.
: http://www.ndt.net/wshop/forum/forum-1.htm
: Please do not reply to email: forum@ndt.net
: For your reply to this message go to:
: http://www.ndt.net/wshop/forum/messages-1/8044.html
------------ End Original Message ------------

Dear Mr.Gopal,

We represent Zetec Inc, USA for their entire product ranges in India. They are the World Leaders in Eddy Current Instrumnets and Systems. If you can give your contact no and address, we willgetin touch with you and help you to solve the problem, with the help of our Principals ZETEC, USA.

Simon Amallraja.
Mobile: 098663 43309. Contact me for further info.


 
 Reply 
 

Product Spotlight

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window