where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

WesDyne International (AMDATA Products)
WesDyne is an engineering and technical services firm dedicated to providing standard and custom nondestructive examinations (NDE) products and systems
6689 views
Technical Discussions
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 609

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
609
00:34 May-06-1999
ICE Eschede Accident in ZDF-TV Today: Die Todesfahrt des ICE 884

A report will be broadcasted via ZDF-TV at May 6., 20:15 - 21:25.
More background of the broken wheel will be presented with a main focus
on the question "was it possible to prevent this accident",
according to a ZDF-TV preview [1][2].
Obviously it will not be very technical, but in respect to responsibility
and ethics of NDT, it's may be worthwhile to see it.

I was contacted a lot during the days after the accident in May 1998 from
a ZDF-TV journalist, however, so far no information had been broadcasted.
Only Focus-TV broadcasted our interview /news/1998/bahn_tv.htm.
In one of my former comments I suspected that ZDF-TV was manipulated by
the railway lobby [2].
It will be interesting to see today if now objective information will be shown.

In a coincidence of this topic some railway news are part of this month's issue,
e.g. "Continuing Railway Accidents Show the Importance of NDT".

Rolf Diederichs

References
[1] ZDF Press Preview
http://www.zdf.de/programm/tv_programm/07471/content.asp?pa1nr=B1E4A6E9943D5000

[2] Snap shoot of the wheel in breaking according to a ZDF animation
http://www.ndt.net/wshop/attach/zdfanim.jpg

[3] Summary of NDT response to the train accident
http://www.ndt.net/news/1998/bahn107.htm

[4] Continuing Railway Accidents Show the Importance of NDT
http://www.ndt.net/news/1999/rail05.htm

[5] Rolf Diederichs in an Interview with Focus-TV on PRO 7
http://www.ndt.net/news/1998/bahn_tv.htm


 
 Reply 
 
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 609

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
609
03:05 May-11-1999
Re: ICE Eschede Accident in ZDF-TV Today: Die Todesfahrt des ICE 884
I would like to inform you about the essential findings the TV report mentioned.

- With a wrong construction of the traveling gear (axle) the problems started.
- Mono-block wheels have been replaced in an early stage because of to much vibrations.
- The new wheel with a ring and rubber attachment was a safety risk.
- The Deutsche Bahn knew about the safety risk (inner surface fatigue cracks),
however did not applied appropriated in-service inspections e.g. ultrasonic testing.

The report did NOT mentioned that the DB recognized the weakness of its in-service inspection,
however, developed a wrong concept (ultrasonic surface wave method).

Rolf Diederichs

----------
: A report will be broadcasted via ZDF-TV at May 6., 20:15 - 21:25.
: More background of the broken wheel will be presented with a main focus
: on the question "was it possible to prevent this accident",
: according to a ZDF-TV preview [1][2].
: Obviously it will not be very technical, but in respect to responsibility
: and ethics of NDT, it's may be worthwhile to see it.

: I was contacted a lot during the days after the accident in May 1998 from
: a ZDF-TV journalist, however, so far no information had been broadcasted.
: Only Focus-TV broadcasted our interview /news/1998/bahn_tv.htm.
: In one of my former comments I suspected that ZDF-TV was manipulated by
: the railway lobby [2].
: It will be interesting to see today if now objective information will be shown.

: In a coincidence of this topic some railway news are part of this month's issue,
: e.g. "Continuing Railway Accidents Show the Importance of NDT".

: Rolf Diederichs

: References
: [1] ZDF Press Preview
: http://www.zdf.de/programm/tv_programm/07471/content.asp?pa1nr=B1E4A6E9943D5000

: [2] Snap shoot of the wheel in breaking according to a ZDF animation
: http://www.ndt.net/wshop/attach/zdfanim.jpg

: [3] Summary of NDT response to the train accident
: http://www.ndt.net/news/1998/bahn107.htm

: [4] Continuing Railway Accidents Show the Importance of NDT
: http://www.ndt.net/news/1999/rail05.htm

: [5] Rolf Diederichs in an Interview with Focus-TV on PRO 7
: http://www.ndt.net/news/1998/bahn_tv.htm




 
 Reply 
 

Product Spotlight

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window