where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
709 views
Technical Discussions
jonathan
jonathan
08:32 Mar-29-2005
mag field indicator cal

what test equipment is needed for the calibration of field strength indicators.


 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 306

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
306
09:56 Mar-30-2005
Re: mag field indicator cal
----------- Start Original Message -----------
: what test equipment is needed for the calibration of field strength indicators.
------------ End Original Message ------------

Jonathan,
You will need a Calibrated Field Strength Meter plus a special fixture to hold the Field Strength Indicator as a minimum.
Equipment to do this is likely to cost around GB£2000 or more (US$3350).
The calibrated meter will also need regular calibration.
If you only have a few indicators to calibrate, most companies have them calibrated by an external source.

NDT Consultants Ltd. in the United Kingdom can offer this service for you at a cost which is currently GB£25.00 per meter plus relevant taxes and shipping.

Please contact Sales@ndt-consultants.co.uk for more information.

Regards,

Godfrey Hands


 
 Reply 
 
droitdak
droitdak
02:40 Jan-28-2006
droitdak
test. ignore it. (tiasalou)


 
 Reply 
 

Product Spotlight

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

GUL Subsea Solutions - Screeening & Monitoring

To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
...
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window