where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
712 views
Technical Discussions
jonathan
jonathan
08:32 Mar-29-2005
mag field indicator cal

what test equipment is needed for the calibration of field strength indicators.


 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 306

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
306
09:56 Mar-30-2005
Re: mag field indicator cal
----------- Start Original Message -----------
: what test equipment is needed for the calibration of field strength indicators.
------------ End Original Message ------------

Jonathan,
You will need a Calibrated Field Strength Meter plus a special fixture to hold the Field Strength Indicator as a minimum.
Equipment to do this is likely to cost around GB£2000 or more (US$3350).
The calibrated meter will also need regular calibration.
If you only have a few indicators to calibrate, most companies have them calibrated by an external source.

NDT Consultants Ltd. in the United Kingdom can offer this service for you at a cost which is currently GB£25.00 per meter plus relevant taxes and shipping.

Please contact Sales@ndt-consultants.co.uk for more information.

Regards,

Godfrey Hands


 
 Reply 
 
droitdak
droitdak
02:40 Jan-28-2006
droitdak
test. ignore it. (tiasalou)


 
 Reply 
 

Product Spotlight

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window