where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
865 views
Technical Discussions
James JOE
R & D, Ultrasonic Specialist
ASNT,KSNT, South Korea, Joined Jan 2005, 5

James JOE

R & D, Ultrasonic Specialist
ASNT,KSNT,
South Korea,
Joined Jan 2005
5
05:13 Mar-31-2005
inclusion detection

Would you please let me know whick manufactuer can detect inclusion of steel plate of 2mm thickness, 1800mm width and 100MPM speed?



 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
00:56 Apr-01-2005
Re: inclusion detection
----------- Start Original Message -----------
: Would you please let me know whick manufactuer can detect inclusion of steel plate of 2mm thickness, 1800mm width and 100MPM speed?
------------ End Original Message ------------

Dear James,

Could be a little more specific? Are you interested in detecting inclusions in a steel plate of 2 mm thickness as it is being produced (at the cold rolling stage)? If yes, which type of inclusion? Metallic or non-metallic? What size?

Swamy



 
 Reply 
 
Richard Kazares
Richard Kazares
00:24 Apr-01-2005
Re: inclusion detection
I'm assuming that you mean that the plate is 2 mm thick with a 1800 mm width and 100 M per Minute speed. If that is correct, we produce various versions of in-line (fixed or semi-portable) delamination systems that can be configured for your application.

You can send me a direct e-mail and I'll provide you with more detials.


----------- Start Original Message -----------
: : Would you please let me know whick manufactuer can detect inclusion of steel plate of 2mm thickness, 1800mm width and 100MPM speed?
: Dear James,
: Could be a little more specific? Are you interested in detecting inclusions in a steel plate of 2 mm thickness as it is being produced (at the cold rolling stage)? If yes, which type of inclusion? Metallic or non-metallic? What size?
: Swamy
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window