where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
867 views
Technical Discussions
James JOE
R & D, Ultrasonic Specialist
ASNT,KSNT, South Korea, Joined Jan 2005, 5

James JOE

R & D, Ultrasonic Specialist
ASNT,KSNT,
South Korea,
Joined Jan 2005
5
05:13 Mar-31-2005
inclusion detection

Would you please let me know whick manufactuer can detect inclusion of steel plate of 2mm thickness, 1800mm width and 100MPM speed?



 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
00:56 Apr-01-2005
Re: inclusion detection
----------- Start Original Message -----------
: Would you please let me know whick manufactuer can detect inclusion of steel plate of 2mm thickness, 1800mm width and 100MPM speed?
------------ End Original Message ------------

Dear James,

Could be a little more specific? Are you interested in detecting inclusions in a steel plate of 2 mm thickness as it is being produced (at the cold rolling stage)? If yes, which type of inclusion? Metallic or non-metallic? What size?

Swamy



 
 Reply 
 
Richard Kazares
Richard Kazares
00:24 Apr-01-2005
Re: inclusion detection
I'm assuming that you mean that the plate is 2 mm thick with a 1800 mm width and 100 M per Minute speed. If that is correct, we produce various versions of in-line (fixed or semi-portable) delamination systems that can be configured for your application.

You can send me a direct e-mail and I'll provide you with more detials.


----------- Start Original Message -----------
: : Would you please let me know whick manufactuer can detect inclusion of steel plate of 2mm thickness, 1800mm width and 100MPM speed?
: Dear James,
: Could be a little more specific? Are you interested in detecting inclusions in a steel plate of 2 mm thickness as it is being produced (at the cold rolling stage)? If yes, which type of inclusion? Metallic or non-metallic? What size?
: Swamy
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

Varex Imaging Large Field of View (FOV) Digital Detector Arrays (DDAs)

A larger FOV DDA can reduce the space and volume of the X-ray inspection system on the factory floor
...
, enable faster scanning times, better throughput and better resolution images at a lower dose. Customers can also save time and money. With these benefits in mind, Varex Imaging has designed a family of large FOV detectors (4343HE, XRD 1611, 4343DX-I, 4343CT) for our industrial imaging customers.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window