where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
898 views
Technical Discussions
James JOE
R & D, Ultrasonic Specialist
ASNT,KSNT, South Korea, Joined Jan 2005, 5

James JOE

R & D, Ultrasonic Specialist
ASNT,KSNT,
South Korea,
Joined Jan 2005
5
05:13 Mar-31-2005
inclusion detection

Would you please let me know whick manufactuer can detect inclusion of steel plate of 2mm thickness, 1800mm width and 100MPM speed?



 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
00:56 Apr-01-2005
Re: inclusion detection
----------- Start Original Message -----------
: Would you please let me know whick manufactuer can detect inclusion of steel plate of 2mm thickness, 1800mm width and 100MPM speed?
------------ End Original Message ------------

Dear James,

Could be a little more specific? Are you interested in detecting inclusions in a steel plate of 2 mm thickness as it is being produced (at the cold rolling stage)? If yes, which type of inclusion? Metallic or non-metallic? What size?

Swamy



 
 Reply 
 
Richard Kazares
Richard Kazares
00:24 Apr-01-2005
Re: inclusion detection
I'm assuming that you mean that the plate is 2 mm thick with a 1800 mm width and 100 M per Minute speed. If that is correct, we produce various versions of in-line (fixed or semi-portable) delamination systems that can be configured for your application.

You can send me a direct e-mail and I'll provide you with more detials.


----------- Start Original Message -----------
: : Would you please let me know whick manufactuer can detect inclusion of steel plate of 2mm thickness, 1800mm width and 100MPM speed?
: Dear James,
: Could be a little more specific? Are you interested in detecting inclusions in a steel plate of 2 mm thickness as it is being produced (at the cold rolling stage)? If yes, which type of inclusion? Metallic or non-metallic? What size?
: Swamy
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window