where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
891 views
Technical Discussions
James JOE
R & D, Ultrasonic Specialist
ASNT,KSNT, South Korea, Joined Jan 2005, 5

James JOE

R & D, Ultrasonic Specialist
ASNT,KSNT,
South Korea,
Joined Jan 2005
5
05:13 Mar-31-2005
inclusion detection

Would you please let me know whick manufactuer can detect inclusion of steel plate of 2mm thickness, 1800mm width and 100MPM speed?



 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
00:56 Apr-01-2005
Re: inclusion detection
----------- Start Original Message -----------
: Would you please let me know whick manufactuer can detect inclusion of steel plate of 2mm thickness, 1800mm width and 100MPM speed?
------------ End Original Message ------------

Dear James,

Could be a little more specific? Are you interested in detecting inclusions in a steel plate of 2 mm thickness as it is being produced (at the cold rolling stage)? If yes, which type of inclusion? Metallic or non-metallic? What size?

Swamy



 
 Reply 
 
Richard Kazares
Richard Kazares
00:24 Apr-01-2005
Re: inclusion detection
I'm assuming that you mean that the plate is 2 mm thick with a 1800 mm width and 100 M per Minute speed. If that is correct, we produce various versions of in-line (fixed or semi-portable) delamination systems that can be configured for your application.

You can send me a direct e-mail and I'll provide you with more detials.


----------- Start Original Message -----------
: : Would you please let me know whick manufactuer can detect inclusion of steel plate of 2mm thickness, 1800mm width and 100MPM speed?
: Dear James,
: Could be a little more specific? Are you interested in detecting inclusions in a steel plate of 2 mm thickness as it is being produced (at the cold rolling stage)? If yes, which type of inclusion? Metallic or non-metallic? What size?
: Swamy
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

New PHAsis module for longitudinal weld seam inspection

PHAsis® Phased Array manual ultrasonic spot weld inspection device is now ideally suited for test
...
ing of longitudinally welded seams (e.g. Arplas® seam, short line seams) with a length of 3 to 12 mm.
>

Micro CT

nanoVoxel series has nano-scale resolution by using high voltage X-ray source (from 80-300 kV) wit
...
h micro focal spot and highly sensitive detector including different kinds of big size panel detectors and lens coupling CCD.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window