where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Iris Inspection Services, Inc.
We are the world's largest supplier of air cooler, boiler and exchanger tubing inspection services.
1287 views
Technical Discussions
Dipl.-Ing. Martin Heinz
Dipl.-Ing. Martin Heinz
09:40 May-11-1999
Standards for Testing Ultrasonic Transducers

Up to now we used our own testing methods. Because thus the values are not good comparable I`m searching
for standarized testing methods for our ultrasonic transducers.
Who know standards (e. g. ASTM, which number?), which describes testing methods for the specification of
ultrasonic transducers? I`m searching for standardized methods for the determination of:
- Sensitivity (e. g. P/E-measurement, which reflector distance?, what driving signal (burst with how many cycles or pulse...)
- Pulse width (How must the driving pulse be specified for a standard measurement?)
- Bandwidth (Is in the standard method a pulse measurement with Fourier transformation used, or is a sweeped CW signal used?)



 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
01:15 May-11-1999
Re: Standards for Testing Ultrasonic Transducers

: Up to now we used our own testing methods. Because thus the values are not good comparable I`m searching
: for standarized testing methods for our ultrasonic transducers.
: Who know standards (e. g. ASTM, which number?), which describes testing methods for the specification of
: ultrasonic transducers? I`m searching for standardized methods for the determination of:
: - Sensitivity (e. g. P/E-measurement, which reflector distance?, what driving signal (burst with how many cycles or pulse...)
: - Pulse width (How must the driving pulse be specified for a standard measurement?)
: - Bandwidth (Is in the standard method a pulse measurement with Fourier transformation used, or is a sweeped CW signal used?)

You should obtain a copy of ASTM E 1065-96, "Standard Guide for Evaluating Characteristics of Ultrasonic Search Units". It is fairly detailed, and seems to be generally recognized as a good standard for NDT transducer qualification.

--Tom Nelligan
Senior Applications Engineer


 
 Reply 
 
Rolf D.
Director,
NDT.net, Germany, Joined Nov 1998, 609

Rolf D.

Director,
NDT.net,
Germany,
Joined Nov 1998
609
01:47 May-11-1999
Re: Standards for Testing Ultrasonic Transducers
al Committee
CEN/TC 138 "Non-destructive testing" of which the secretariat is held by AFNOR.

This document is currently submitted to the formal vote.

This standard consists of the following parts:
EN 12668-1, Non-destructive testing and verification of ultrasonic
examination equipment - Part 1: Instruments
EN 12668-2, Non-destructive testing - Characterization and
verification of ultrasonic examination equipment - Part 2: Probes
EN 12668-3, Non-destructive testing - Characterization and
verification of ultrasonic examination equipment - Part 3: Combined
equipment


Rolf Diederichs



 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1286

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1286
06:29 May-16-1999
Re: Standards for Testing Ultrasonic Transducers
In addition to the references by Tom & Rolf DIN 25 450
is a good and comprehensive Code.
Also see:
AFNOR A09-323
JIS Z 2352
ESI-98-9
BS 4331

Ed


: Up to now we used our own testing methods. Because thus the values are not good comparable I`m searching
: for standarized testing methods for our ultrasonic transducers.
: Who know standards (e. g. ASTM, which number?), which describes testing methods for the specification of
: ultrasonic transducers? I`m searching for standardized methods for the determination of:
: - Sensitivity (e. g. P/E-measurement, which reflector distance?, what driving signal (burst with how many cycles or pulse...)
: - Pulse width (How must the driving pulse be specified for a standard measurement?)
: - Bandwidth (Is in the standard method a pulse measurement with Fourier transformation used, or is a sweeped CW signal used?)




 
 Reply 
 

Product Spotlight

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window