where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

480 views
Technical Discussions
Lew King
Lew King
00:47 Apr-18-2005
wrought iron inspection

Dear all;
In Australia, we have numerous wrought iron rail bridges that are +100yrs old.
Some of these bridges have a couple of issues with corrosion of the original material post modification.
The configuration in question is a sandwich of 2 x 18mm mild steel outer, added with 1 x 6mm original wrought iron inner.
For further reference, the inner is a I beam web and the outers are web stiffeners that were added to provide additonal strength to the member.
Other than RT, what portable alternative methods / new technologies are available for the detection of gross corrosion / wall loss (>25%) of the inner web in a timely manner??????
Note, access is not a problem and survey of outer web stiffeners is also not a problem.


 
 Reply 
 
John
John
01:04 Jul-05-2005
Re: wrought iron inspection
RTD Steeltest
2 Thorpe Way
Kwinana Beach
Perth, WA 6167
Australia
Telephone +61 (0) 8 943 95 656
E-mail admin@rtdsteeltest.com.au
Internet http://www.rtdsteeltest.com.au

I think these people can help you out

kind regards John




 
 Reply 
 

Product Spotlight

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window