where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
455 views
Technical Discussions
James Gauthier
Engineering,
ABB, Inc., USA, Joined Nov 2007, 25

James Gauthier

Engineering,
ABB, Inc.,
USA,
Joined Nov 2007
25
02:27 May-05-2005
Electronic Exposure Time Calculator

I have several versions of both X-ray and Gamma exposure calculators. What I am looking for is customizable electronic versions that could be used for several different applications. Does anyone know of any new programs that are available on the market? I am looking for these items with Computed Radiography and Digital Radiography in mind. Would like to have inputs that allow calculations of double wall exposures with ratios of liquid and vapour/gas filled piping systems. Would like to be able to customize many fields for many different applications. Your help is appreciated in this matter. Mainly looking to save time calculating the tried and true method (using a slide rule)


 
 Reply 
 
Srdjan
Srdjan
05:04 May-17-2006
Re: Electronic Exposure Time Calculator
Well, I am developing one. However for 192Ir, 60Co and 75Se. Results are not bed, but it is in development stage now (so far for one film density range 2.5-3.0)


 
 Reply 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window