where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1273 views
Technical Discussions
Sam Azoka Onyechi
Director, NDT Practitioner
Inspection and Tests Nigeria Limited, Nigeria, Joined Jul 2004, 17

Sam Azoka Onyechi

Director, NDT Practitioner
Inspection and Tests Nigeria Limited,
Nigeria,
Joined Jul 2004
17
00:33 May-12-2005
Need for EMI Equipment

We have a need for Electro Magnetic Inspection equipment for full body inspection of tubular goods. Can anyone with info on good manufacturers of this and other Tubular inspection equipment pls assist. Many thanks.



 
 Reply 
 
Frank Lund
R & D,
United Kingdom, Joined Apr 2005, 222

Frank Lund

R & D,
United Kingdom,
Joined Apr 2005
222
00:51 May-12-2005
Re: Need for EMI Equipment
NEWT International manufactures a range of EMA (Electro-Magnetic Array) equipment for crack detection. I invite you to look at the website www.lizard.co.uk or contact Steve Greenall sgreenall@lizard.co.uk

----------- Start Original Message -----------
: We have a need for Electro Magnetic Inspection equipment for full body inspection of tubular goods. Can anyone with info on good manufacturers of this and other Tubular inspection equipment pls assist. Many thanks.
------------ End Original Message ------------




 
 Reply 
 
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 617

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
617
02:50 May-12-2005
Re: Need for EMI Equipment
A search in the NDT.net Exhibition delivers 8 results for "EMAT"

1. Acoustic Control Systems Ltd.
2. ECLIPSE SCIENTIFIC PRODUCTS
3. Lucid Software Ltd
4. Matec Instrument Companies, Inc.
5. NORDINKRAFT
6. Q Net Quality Management GmbH
7. R/D Tech
8. RWE Power International

Search link:
www.ndt.net/exhibit/list.php3?orderBy=Exhibitor.name&listType=0&Method=-1&Type=-1&Country=-1&Find=emat&searchmode=AND


----------- Start Original Message -----------
: We have a need for Electro Magnetic Inspection equipment for full body inspection of tubular goods. Can anyone with info on good manufacturers of this and other Tubular inspection equipment pls assist. Many thanks.
------------ End Original Message ------------




 
 Reply 
 
David Steely
David Steely
06:08 Jun-10-2005
Re: Need for EMI Equipment
Dear Sam Azoka Onyechi:

You had posted a request for information on the ndt.net formu. Please refer to our web pages at www.pitcoinc.com for full body EMI pipe inspection equipment. Bob Leslie at bobl@scansystems.com can help you define what you need.

Best Regards

David Steely
Division Manager
Scan Systems Corporation
14424 Interdrive West
Houston, TX 77032 USA

Telephone: (281) 219-9480 x 113
FAX: (281) 219-2317

www.scansystems.com

davids@scansystems.com




 
 Reply 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window