where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

945 views
Technical Discussions
Mahmoud Mohamed
Mahmoud Mohamed
00:56 May-21-2005
Inspection at bottom plates of LNG tank

Dear Sir
Are magnetic fluxes leakages can help us to inspect at welding of bottom plates of LNG tank? Please advice me by the best technique for inspection at bottom plate welding


    
 
 
Frank Lund
R & D,
United Kingdom, Joined Apr 2005, 219

Frank Lund

R & D,
United Kingdom,
Joined Apr 2005
219
00:34 May-23-2005
Re: Inspection at bottom plates of LNG tank
You can use the electromagnetic array (EMA) technique to look for surface breaking cracks in your welds or plates. It has also been used to map corrosion on the inside of marine dieso tanks.


----------- Start Original Message -----------
: Dear Sir
: Are magnetic fluxes leakages can help us to inspect at welding of bottom plates of LNG tank? Please advice me by the best technique for inspection at bottom plate welding
------------ End Original Message ------------




    
 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 278

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
278
05:21 May-23-2005
Re: Inspection at bottom plates of LNG tank
Mahmoud

please specify weld type and is this new construction sor post service inspection.

MFL is not used for weld inspection.

If lap welds, vaccuum box is normal. If butt weld radiography or UT. Eddy Current can also be considered.

Define the problem then select the appropriate technique.



    
 
 
RT JEYAKUMAR
NDT Inspector
Singapore, Joined Aug 2002, 10

RT JEYAKUMAR

NDT Inspector
Singapore,
Joined Aug 2002
10
06:27 May-24-2005
Re: Inspection at bottom plates of LNG tank
If it is butt welding, you can prefer to go for RT/UT.
If it is other than butt welding, UT is preferable.

for more information, give me some more details about this and contact me in my mail

Best regards

RT Jeyakumar


    
 
 

Product Spotlight

Aerospace Systems - Automated Ultrasonic Inspection

USL are specialists in the design and manufacture of turnkey ultrasonic inspection systems for aer
...
ospace applications. From monolithic composites to complex honeycomb structures. This video shows just a few examples of what is possible, find out more at: www.ultrasonic-sciences.co.uk
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

NEOS III

NEOS III is Logos Imagings lightest DR system. With a built-in battery and internal wireless commu
...
nication, the NEOS III is perfect for users that want to quickly assess an item.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window