where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

619 views
Technical Discussions
jimmy
jimmy
08:54 May-21-2005
Acoustic C scan

hi, any one know about Acoustic C-scan for tank bottom plate scanning? with contents inside? we got a contract to do it ? if some one familiar with this technique plz mail me
regards
jimmy


 
 Reply 
 
Richard Kazares
Richard Kazares
03:57 May-22-2005
Re: Acoustic C scan
Acoustic Emission testing can provide tank floor testing capability with the contents STILL INSIDE. Visit www.pacndt.com for an introduction. You may contact Physical Acoustics Corp. for more information.

----------- Start Original Message -----------
: hi, any one know about Acoustic C-scan for tank bottom plate scanning? with contents inside? we got a contract to do it ? if some one familiar with this technique plz mail me
: regards
: jimmy
------------ End Original Message ------------




 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
05:22 May-23-2005
Re: Acoustic C scan
Do you really mean Acoustic C-Scan? I think you mean on-line condition assessment of tank floors with Acoustic Emission.

If so please contact me.



 
 Reply 
 
Simon Amallraja
Simon Amallraja
04:13 May-24-2005
Re: Acoustic C scan
----------- Start Original Message -----------
: hi, any one know about Acoustic C-scan for tank bottom plate scanning? with contents inside? we got a contract to do it ? if some one familiar with this technique plz mail me
: regards
: jimmy
------------ End Original Message ------------

We represent Vallen SYsteme, GmbH, for Acoustic Emission. If you are in India, you can contact us for all details. We represent them in India.

D.Simon Amallraja.
Mobile: 098663 43309


 
 Reply 
 

Product Spotlight

MANTIS

MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
...
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window