where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

VOGT Ultrasonics GmbH
non-destructive testing, services, training, ultrasonic systems, immersion and squirter inspection systems, PROline, digital radiology
728 views
Technical Discussions
Thomas Fuchs
Thomas Fuchs
08:50 Jul-13-1998
Re: Non Contact Film thickness measurement of wet film
: Hello,
: Can anyone help me locate a device to measure the wet film thickness of a coating (solvent based) that is on a polyurethane roll that is turning 110 feet per minute? I need a range of .001" to .002", with a resolution of .0002".
: thank you

Sorry, I just found your inquiry today (July 13).
We could offer such a gauge: non-contact, non-radiation, approx. 0.1-150 microns +/- 0.005 mircons,
extremely fast: up to 1000 thickness values per second!
Please check this Webpage for more information: http://www.applied-spectroscopy.com/ftm.htm


 
 Reply 
 
Jody Price
Jody Price
09:14 May-17-1999
Re: Non Contact Film thickness measurement of wet film
: Hello,
: Can anyone help me locate a device to measure the wet film thickness of a coating (solvent based) that is on a polyurethane roll that is turning 110 feet per minute? I need a range of .001" to .002", with a resolution of .0002".
: thank you

Dear Frank,

We have a new system that will measure thickness either on wet polyester roll or directly on the metal surface.

This system is very new. We have tried it on polyester film coating applications. The accuracy is well within your boundaries. Either wet or dry.

We have had no luck in contacting you directly and more or less gave up. Several coil coaters have also expressed interest in this system now and we are proceeding with them now.

Jody Price
sales@filmthickness.com




 
 Reply 
 
KI SU YOOn
KI SU YOOn
01:32 Oct-08-1999
Re: Non Contact Film thickness measurement of wet film
: Hello,
: Can anyone help me locate a device to measure the wet film thickness of a coating (solvent based) that is on a polyurethane roll that is turning 110 feet per minute? I need a range of .001" to .002", with a resolution of .0002".
: thank you




 
 Reply 
 
Leo
Leo
14:17 Apr-14-2016
Re: Non Contact Film thickness measurement of wet film
In Reply to Thomas Fuchs at 08:50 Jul-13-1998 .

I think here is a possible resource
www.semiconsoft.com/wp/

 
 Reply 
 

Product Spotlight

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window