where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
6187 views
Technical Discussions
NAT
Engineering, Chief Examiner -NDT Manager
SGS EGYPT, Singapore, Joined Jan 2002, 4

NAT

Engineering, Chief Examiner -NDT Manager
SGS EGYPT,
Singapore,
Joined Jan 2002
4
05:19 May-16-2004
Authorized Inspector


Can the forum members guide me how to apply for AI certification , OUTSIDE USA.


 
 Reply 
 
vernon ward
vernon ward
05:16 May-17-2004
Re: Authorized Inspector
----------- Start Original Message -----------
:
: Can the forum members guide me how to apply for AI certification , OUTSIDE USA.
------------ End Original Message ------------

Contact John O'Brien at obirc@aol.com

He holds very informative training courses on API 510, API 653 and API 570 outside the USA. He can tell you all you need to know.




 
 Reply 
 
NAT
Engineering, Chief Examiner -NDT Manager
SGS EGYPT, Singapore, Joined Jan 2002, 4

NAT

Engineering, Chief Examiner -NDT Manager
SGS EGYPT,
Singapore,
Joined Jan 2002
4
09:21 May-30-2004
Re: Authorized Inspector
----------- Start Original Message -----------
: :
: : Can the forum members guide me how to apply for AI certification , OUTSIDE USA.
: Contact John O'Brien at obirc@aol.com
: He holds very informative training courses on API 510, API 653 and API 570 outside the USA. He can tell you all you need to know.

Thank you for the information
------------ End Original Message ------------




 
 Reply 
 
llpcode
NDT Inspector
Shaw Group, USA, Joined Jan 2004, 3

llpcode

NDT Inspector
Shaw Group,
USA,
Joined Jan 2004
3
03:18 Jun-08-2004
Re: Authorized Inspector
----------- Start Original Message -----------
: : :
: : : Can the forum members guide me how to apply for AI certification , OUTSIDE USA.
: : Contact John O'Brien at obirc@aol.com
: : He holds very informative training courses on API 510, API 653 and API 570 outside the USA. He can tell you all you need to know.
: Thank you for the information
------------ End Original Message ------------

Actually, an ASME Authorized Inspector is different than an Inspector certified under API provisions.

You would need to be in the employment of an ASME Authorized Inspection Agency or a Juridiction to be able to take the NAtional Board examination.

Better to contact the National Board at 614-888-8320 and get clear information.


 
 Reply 
 
NAT
NAT
06:20 Jun-14-2004
Re: Authorized Inspector
----------- Start Original Message -----------
: : : :
: : : : Can the forum members guide me how to apply for AI certification , OUTSIDE USA.
: : : Contact John O'Brien at obirc@aol.com
: : : He holds very informative training courses on API 510, API 653 and API 570 outside the USA. He can tell you all you need to know.
: : Thank you for the information
: Actually, an ASME Authorized Inspector is different than an Inspector certified under API provisions.
: You would need to be in the employment of an ASME Authorized Inspection Agency or a Juridiction to be able to take the NAtional Board examination.
: Better to contact the National Board at 614-888-8320 and get clear information.
------------ End Original Message ------------
Gentle men
Thanks for the info, NB did confirm that only AIA,Juridiction, user/owner can apply for examination.
Any AIAs interested in a volunteer who want to become an AI ?




 
 Reply 
 
Omar Kiptui
Omar Kiptui
02:45 Jun-14-2005
Re: Authorized Inspector
----------- Start Original Message -----------
: : : :
: : : : Can the forum members guide me how to apply for AI certification , OUTSIDE USA.
: : : Contact John O'Brien at obirc@aol.com
: : : He holds very informative training courses on API 510, API 653 and API 570 outside the USA. He can tell you all you need to know.
: : Thank you for the information
: Actually, an ASME Authorized Inspector is different than an Inspector certified under API provisions.
: You would need to be in the employment of an ASME Authorized Inspection Agency or a Juridiction to be able to take the NAtional Board examination.
: Better to contact the National Board at 614-888-8320 and get clear information.
------------ End Original Message ------------


You do not need to be in the employ of anyone to take the National Board Commission test. I just took it and passed, and have no job right now. You have to be in the employ of an AIA to get a commission, but you have 3 years after passing the testto do that.


 
 Reply 
 
murugesan
murugesan
08:00 Aug-20-2012
Re: Authorized Inspector
In Reply to Omar Kiptui at 02:45 Jun-14-2005 .

Sir

I just read your forum message that you took AI exam without being employed by an AIA or jurisdiction.

Did you find it easier to get a job after securing passing grade in AI exam.

I am also planning to take up the AI exam, but i am not employed by AIA or jurisdiction.

Please provide your input about how to prepare for the exam.

 
 Reply 
 
Danfer De la Cruz
Engineering
Peru, Joined Jun 2009, 11

Danfer De la Cruz

Engineering
Peru,
Joined Jun 2009
11
17:59 Aug-20-2012
Re: Authorized Inspector
In Reply to murugesan at 08:00 Aug-20-2012 .

Dear Sir.

I´m AI-ASME, API510, API653 and CWI.
You shall be attending 15 days a course in columbus-ohio before of test.
You shall be studing ASME seccion VIII, IX, I, IV , V, B31.1 and National Board.
Good Luck

 
 Reply 
 

Product Spotlight

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

NEOS III

NEOS III is Logos Imagings lightest DR system. With a built-in battery and internal wireless commu
...
nication, the NEOS III is perfect for users that want to quickly assess an item.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window