where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1233 views
Technical Discussions
Arun Krishnan
Arun Krishnan
00:40 Jul-03-2005
Inspection of sludge catcher line

Hi,

Does anyone know of a suitable solution for the inspection of sludge catcher lines in a gas plant. We have tried Long Range Guided Wave Ultrasonics - but the results were not satisfactory. If anyone knows of a better technique please let me know.


 
 Reply 
 
Rich Roberts
Engineering, Executive Managment
Quest Integrity Group, USA, Joined Nov 1998, 78

Rich Roberts

Engineering, Executive Managment
Quest Integrity Group,
USA,
Joined Nov 1998
78
07:25 Jul-04-2005
Re: Inspection of sludge catcher line
Good Day Arun,

To determine the best NDE technique, you would need to supply what type(s) of damage mechanisms you are interested in detecting. We use to apply automated ultrasonics (AUT) when inspecting these type of lines in Alaska. Other options may be Real Time Radiography (RTR), etc. Again, it is important to know if it is corrosion, erosion, cracking, etc. in order to select the right NDE technique.
Regards, Rich


----------- Start Original Message -----------
: Hi,
: Does anyone know of a suitable solution for the inspection of sludge catcher lines in a gas plant. We have tried Long Range Guided Wave Ultrasonics - but the results were not satisfactory. If anyone knows of a better technique please let me know.
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window