where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
465 views
Technical Discussions
Lew King
Lew King
00:47 Apr-18-2005
wrought iron inspection

Dear all;
In Australia, we have numerous wrought iron rail bridges that are +100yrs old.
Some of these bridges have a couple of issues with corrosion of the original material post modification.
The configuration in question is a sandwich of 2 x 18mm mild steel outer, added with 1 x 6mm original wrought iron inner.
For further reference, the inner is a I beam web and the outers are web stiffeners that were added to provide additonal strength to the member.
Other than RT, what portable alternative methods / new technologies are available for the detection of gross corrosion / wall loss (>25%) of the inner web in a timely manner??????
Note, access is not a problem and survey of outer web stiffeners is also not a problem.


 
 Reply 
 
John
John
01:04 Jul-05-2005
Re: wrought iron inspection
RTD Steeltest
2 Thorpe Way
Kwinana Beach
Perth, WA 6167
Australia
Telephone +61 (0) 8 943 95 656
E-mail admin@rtdsteeltest.com.au
Internet http://www.rtdsteeltest.com.au

I think these people can help you out

kind regards John




 
 Reply 
 

Product Spotlight

GUL Subsea Solutions - Screeening & Monitoring

To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
...
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window