where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Materials Research Institute
Consulting to the NDT industry.
528 views
Technical Discussions
dharmaraj
dharmaraj
03:52 Jul-06-2005
film viewers.

Hai friends,
How to calibrate the film viewer.


 
 Reply 
 
Ed T.
Ed T.
06:11 Jul-09-2005
Re: film viewers.
----------- Start Original Message -----------
: Hai friends,
: How to calibrate the film viewer.
------------ End Original Message ------------

Try using a density strip.


 
 Reply 
 
N.Arunachalam
N.Arunachalam
07:40 Jul-29-2005
Re: film viewers.
----------- Start Original Message -----------
: : Hai friends,
: : How to calibrate the film viewer.
: Try using a density strip.
------------ End Original Message ------------

We have to use the light meter to measure the quantity of light from the viewer, if the viewer is meant for measuring film density of 4 , find the incident light requirement using the Code requiremnt at the surface of the viewer,

Assume 30 lux of transmited light on 4 density film is required for better viewing by normal eye condition then using the log priciple ,30 X 10,000 lux of incident light is required on the surface of viewer, but you cannot measure this high quantity light by normal low range light meters( in the market available meters having maximum 3000 lux only), so measure the light intensity in a pre determine vertical ( 750mm) distance from the viewer middle surface and calculate the amount of light intensity on the viewer by using inverse square law priciple.the calculated light must be more than 300,000 lux on the surface,( this value may vary if you asume differnt value of transmitted light indensity)



 
 Reply 
 

Product Spotlight

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

Varex Imaging Large Field of View (FOV) Digital Detector Arrays (DDAs)

A larger FOV DDA can reduce the space and volume of the X-ray inspection system on the factory floor
...
, enable faster scanning times, better throughput and better resolution images at a lower dose. Customers can also save time and money. With these benefits in mind, Varex Imaging has designed a family of large FOV detectors (4343HE, XRD 1611, 4343DX-I, 4343CT) for our industrial imaging customers.
>

Ultrasonic tomograph for imaging of concrete structures А1040 MIRA

Applicable for concrete inspection allowing imaging of the internal structure of objects from conc
...
rete, reinforced concrete, different stones. The operation applies pulse-echo technique at one-side access to the object. The instrument is feasible for concrete inspection for searching conduct ducts, conduits, detection of foreign inclusions, holes, honeycombing, cracks and other concrete defects.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window