where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

WesDyne International (AMDATA Products)
WesDyne is an engineering and technical services firm dedicated to providing standard and custom nondestructive examinations (NDE) products and systems
2090 views
Technical Discussions
Johnnie
Johnnie
02:22 Jul-10-2005
Ultrasonic angle beam formula for cylindrical forgings.

I would like to know the formula for proper angle use to impinge id of thick wallcylindrical forgings/pipe.


 
 Reply 
 
Ed T.
Ed T.
05:25 Jul-13-2005
Re: Ultrasonic angle beam formula for cylindrical forgings.
----------- Start Original Message -----------
: I would like to know the formula for proper angle use to impinge id of thick wallcylindrical forgings/pipe.
------------ End Original Message ------------

SinØ 1 = (ID/OD) * SinØ2
SINØ2 being the desired angle on the ID surface.


 
 Reply 
 
K.V. Rasmussen
K.V. Rasmussen
09:15 Jul-13-2005
Re: Ultrasonic angle beam formula for cylindrical forgings.
----------- Start Original Message -----------
: I would like to know the formula for proper angle use to impinge id of thick wallcylindrical forgings/pipe.
------------ End Original Message ------------

Many years ago I found some useful formulas in Materials Evaluation No. 43, November 1985, page 1489.
This was published under the heading 'NDT Solutions' by Jim Johnson.

If you are interested contact me directly via e-mail and I can send you a PDF copy.





 
 Reply 
 
N.DHANASEKARAN
R & D
WELDING RESEARCH INSTITUTE, BHEL, India, Joined Jun 2005, 3

N.DHANASEKARAN

R & D
WELDING RESEARCH INSTITUTE, BHEL,
India,
Joined Jun 2005
3
01:42 Jul-15-2005
Re: Ultrasonic angle beam formula for cylindrical forgings.


Hello!
Well known formula to calculate the penetrated depth (d) by angle beam (¥è), knowing outer radius(r) of the pipe is given below:

d = r (1- sin¥è)

By substituting the thickness of the pipe in place of "d", for full penetration by the sound beam, one can calculate the angle required.
For example , 25 mm thick pipe of radius 100 mm will require 45 degree angle probe to detect inner notch in the ref.pipe.
N.DHANASEKARAN


-


---------- Start Original Message -----------
: : I would like to know the formula for proper angle use to impinge id of thick wallcylindrical forgings/pipe.
: Sin¨ª 1 = (ID/OD) * Sin¨ª2
: SIN¨ª2 being the desired angle on the ID surface.
: Sorry misprint.
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

VeeScan AirCraft Wheel Inspection

The VEESCAN offers maximum flexibility, has a proven mechanical design and records of breakdown-fr
...
ee operation of over 365 days. Appealing to companies in the Aerospace industry, the VEESCAN is ideal for all wheel-testing environments. With a wide selection of probes, the VeeScan allows your wheel testing facility the flexibility to select the most compatible configurations with their workload.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window