where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1759 views
Technical Discussions
Micha
Micha
04:55 Sep-07-2004
SAW and ERW pipes - standards

does anybody know of specific standards for UT of SAW and ERW pipes?
specificaly i am interested in the standards for inspection of the weld seam.


 
 Reply 
 
Ed T.
Ed T.
05:21 Sep-08-2004
Re: SAW and ERW pipes - standards
----------- Start Original Message -----------
: does anybody know of specific standards for UT of SAW and ERW pipes?
: specificaly i am interested in the standards for inspection of the weld seam.
------------ End Original Message ------------

Look in ASME Section V, Article 4 or 5. The basic calibration blocks for UT are based on the base material not the welding process.
However, the UT operator should be familiar with the welding process in order to determine what type of indications to excpect.


 
 Reply 
 
ajay singh
ajay singh
05:05 Feb-16-2005
Re: SAW and ERW pipes - standards
Dear sir,
we are looking for Stainless steel ERW or seam less pipe of AISI 304 or
310 grade.
outer dia 48.3 /44.5 thickness 2.6-2.7 MM length 6.1 Mt
Final destination Kolkata/Mumbai India.

Pls. offer your best price C&F destnation.Qunatity required is up to
200MT per month.
Regards,
ajay singh




 
 Reply 
 
Nikhil Arya
NDT Inspector
Surya Roshni Limited (Steel Division), India, Joined Jul 2005, 1

Nikhil Arya

NDT Inspector
Surya Roshni Limited (Steel Division),
India,
Joined Jul 2005
1
06:00 Jul-11-2005
Re: SAW and ERW pipes - standards
----------- Start Original Message -----------
: : does anybody know of specific standards for UT of SAW and ERW pipes?
: : specificaly i am interested in the standards for inspection of the weld seam.
: Look in ASME Section V, Article 4 or 5. The basic calibration blocks for UT are based on the base material not the welding process.
: However, the UT operator should be familiar with the welding process in order to determine what type of indications to excpect.
------------ End Original Message ------------

i can tell only for the ERW pipes. N10 & N5 notches at OD & ID are used and through holes at wels seam are used.


 
 Reply 
 
E Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1307

E Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1307
00:30 Jul-12-2005
Re: SAW and ERW pipes - standards
Standards for ERW and SAW pipe seam welds are similar world wide.
The North American versions are API 5L and in Canada CSA Z-245.
A Standard Practice by ASTM is also used, ASTM E-273.

Regards
Ed

----------- Start Original Message -----------
: : : does anybody know of specific standards for UT of SAW and ERW pipes?
: : : specificaly i am interested in the standards for inspection of the weld seam.
: : Look in ASME Section V, Article 4 or 5. The basic calibration blocks for UT are based on the base material not the welding process.
: : However, the UT operator should be familiar with the welding process in order to determine what type of indications to excpect.
: i can tell only for the ERW pipes. N10 & N5 notches at OD & ID are used and through holes at wels seam are used.
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

GUL Subsea Solutions - Screeening & Monitoring

To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
...
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
>

OPBOX with standard software is able to do all types of inspections and measurements: flaw detection in welds and materials, scanning of objects, testing composite materials, forged and moulded pieces, many UT inspections, measurements of properties of ma

Typical applications: UT measurements with pulse technique, Measurement of thicknesses also at hig
...
h temperatures, Measurements of properties of materials, including fluids and gases We are delivering a standard version of the software (for any Microsoft Windows up to 10 x64 with Microsoft Hardware certification report Approved) and for special needs: SDK with ready to use examples for LabView, MATLAB x64, C++ wrapper for dll, Python and Linux., and also low-level description of how to control our devices directly from any USB tools
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window