where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Controle Mesure Systemes
Contrôle Mesure Systèmes (CMS) is a leader in Non Destructive Testing (NDT) with a complete range of products for eddy current and ultrasonic i ...
441 views
Technical Discussions
KRISHNAN
KRISHNAN
07:52 Jul-14-2005
WAVE PATTERN

Dear Sirs,
Is it same of wave pattern (wavelenth and other characteristics) which produced in transducer element and RECEIVING signal after interfering with material' grain structures.

Because I feel that wave length will be distrubed when it crosses too many size of grain boundries.

Please kindly explain me about this topic.

Thank you very much

Regards,

Krishnan


 
 Reply 
 
Dr. Anish Kumar
R & D, Scientist
Indira Gandhi Centre for Atomic Research, India, Joined Mar 2000, 7

Dr. Anish Kumar

R & D, Scientist
Indira Gandhi Centre for Atomic Research,
India,
Joined Mar 2000
7
07:49 Jul-16-2005
Re: WAVE PATTERN
Hi Krishnan, You are right. The frequency characteristics of the ultrasoic wave (I assume you are talking about ultrasoic wave only) changes as it propagates through materials with different grain sizes due to different frequency dependent attenuation. You may see our following papers:

1.Anish Kumar, T. Jayakumar and Baldev Raj "Ultrasonic Spectral Analysis for Microstructural Characterization in Austenitic and Ferritic Steels", Philosophical Magazine A, Vol. 80 (2000) pp. 2469-2487.
2.Anish Kumar, T. Jayakumar, P. Palanichamy and Baldev Raj, "Influence of Grain Size on Ultrasonic Spectral Parameters in AISI Type 316 Stainless Steel
Scripta Materialia, Vol. 40 (1999) pp. 333-340.

Regards,
Anish

----------- Start Original Message -----------
: Dear Sirs,
: Is it same of wave pattern (wavelenth and other characteristics) which produced in transducer element and RECEIVING signal after interfering with material' grain structures.
: Because I feel that wave length will be distrubed whenit crosses too many size of grain boundries.
: Please kindly explain me about this topic.
: Thank you very much
: Regards,
: Krishnan
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

Micro CT

nanoVoxel series has nano-scale resolution by using high voltage X-ray source (from 80-300 kV) wit
...
h micro focal spot and highly sensitive detector including different kinds of big size panel detectors and lens coupling CCD.
>

On-Demand Webinar: Advanced Ultrasonic Techniques for HTHA Detection & Assessment

In the Oil and Gas industry, High Temperature Hydrogen Attack (HTHA) can occur in steels operating a
...
t high temperature, usually above 205°C (400°F). Early stages of HTHA are very difficult to detect. Join us for a webinar presented by Guy Maes, Zetec Sales Engineer Director. The webinar will demonstrate how advanced ultrasonic techniques are deployed for efficient and reliable HTHA inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window