where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

USA Borescopes
USA Borescopes is your one stop source for all your visual inspection requirements. We offer borescopes, videoscopes, push cameras and pipe ins ...
442 views
Technical Discussions
KRISHNAN
KRISHNAN
07:52 Jul-14-2005
WAVE PATTERN

Dear Sirs,
Is it same of wave pattern (wavelenth and other characteristics) which produced in transducer element and RECEIVING signal after interfering with material' grain structures.

Because I feel that wave length will be distrubed when it crosses too many size of grain boundries.

Please kindly explain me about this topic.

Thank you very much

Regards,

Krishnan


 
 Reply 
 
Dr. Anish Kumar
R & D, Scientist
Indira Gandhi Centre for Atomic Research, India, Joined Mar 2000, 7

Dr. Anish Kumar

R & D, Scientist
Indira Gandhi Centre for Atomic Research,
India,
Joined Mar 2000
7
07:49 Jul-16-2005
Re: WAVE PATTERN
Hi Krishnan, You are right. The frequency characteristics of the ultrasoic wave (I assume you are talking about ultrasoic wave only) changes as it propagates through materials with different grain sizes due to different frequency dependent attenuation. You may see our following papers:

1.Anish Kumar, T. Jayakumar and Baldev Raj "Ultrasonic Spectral Analysis for Microstructural Characterization in Austenitic and Ferritic Steels", Philosophical Magazine A, Vol. 80 (2000) pp. 2469-2487.
2.Anish Kumar, T. Jayakumar, P. Palanichamy and Baldev Raj, "Influence of Grain Size on Ultrasonic Spectral Parameters in AISI Type 316 Stainless Steel
Scripta Materialia, Vol. 40 (1999) pp. 333-340.

Regards,
Anish

----------- Start Original Message -----------
: Dear Sirs,
: Is it same of wave pattern (wavelenth and other characteristics) which produced in transducer element and RECEIVING signal after interfering with material' grain structures.
: Because I feel that wave length will be distrubed whenit crosses too many size of grain boundries.
: Please kindly explain me about this topic.
: Thank you very much
: Regards,
: Krishnan
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window