where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
547 views
Technical Discussions
dharmaraj
dharmaraj
03:52 Jul-06-2005
film viewers.

Hai friends,
How to calibrate the film viewer.


 
 Reply 
 
Ed T.
Ed T.
06:11 Jul-09-2005
Re: film viewers.
----------- Start Original Message -----------
: Hai friends,
: How to calibrate the film viewer.
------------ End Original Message ------------

Try using a density strip.


 
 Reply 
 
N.Arunachalam
N.Arunachalam
07:40 Jul-29-2005
Re: film viewers.
----------- Start Original Message -----------
: : Hai friends,
: : How to calibrate the film viewer.
: Try using a density strip.
------------ End Original Message ------------

We have to use the light meter to measure the quantity of light from the viewer, if the viewer is meant for measuring film density of 4 , find the incident light requirement using the Code requiremnt at the surface of the viewer,

Assume 30 lux of transmited light on 4 density film is required for better viewing by normal eye condition then using the log priciple ,30 X 10,000 lux of incident light is required on the surface of viewer, but you cannot measure this high quantity light by normal low range light meters( in the market available meters having maximum 3000 lux only), so measure the light intensity in a pre determine vertical ( 750mm) distance from the viewer middle surface and calculate the amount of light intensity on the viewer by using inverse square law priciple.the calculated light must be more than 300,000 lux on the surface,( this value may vary if you asume differnt value of transmitted light indensity)



 
 Reply 
 

Product Spotlight

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window