where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

3650 views
Technical Discussions
S.R.G.PRABHU
NDT Inspector, AUT AUDITOR/ASNT LEVEL III/AWS SENIOR WELDING INS
India, Joined Sep 2004, 3

S.R.G.PRABHU

NDT Inspector, AUT AUDITOR/ASNT LEVEL III/AWS SENIOR WELDING INS
India,
Joined Sep 2004
3
08:27 Jan-01-2005
API RP 2X- TIPS

Someone please guide me in using API RP2X, with some practical tips in scanning ,T,K,Y joints.What is the normal procedure for passing a client's exam?To pass what is the minmum sizing of a mocked up defect?Is there any other points to note?I am aASNT LEVEL III in UT , but still have to qualify in TKY.
Prabhu


 
 Reply 
 
Collin Maloney
NDT Inspector, - Plant Inspector
Applus RTD, Australia, Joined Nov 2000, 147

Collin Maloney

NDT Inspector, - Plant Inspector
Applus RTD,
Australia,
Joined Nov 2000
147
00:13 Aug-02-2005
Re: API RP 2X- TIPS
----------- Start Original Message -----------
: Someone please guide me in using API RP2X, with some practical tips in scanning ,T,K,Y joints.What is the normal procedure for passing a client's exam?To pass what is the minmum sizing of a mocked up defect?Is there any other points to note?I am aASNT LEVEL III in UT , but still have to qualify in TKY.
: Prabhu
------------ End Original Message ------------

API RP 2X is a procedure that is "For information only" to guide engineers in the selection of NDT acceptance codes. If you want to have practical examples of T,K,Y inspection use AWS D1.1

Cheers



 
 Reply 
 
Ætheling
Ætheling
07:21 Aug-03-2005
Re: API RP 2X- TIPS
There's nothing new to it, RP2X has just one written test and it's the same with or without the T,K,Y certification.
The T,K,Y testing will be practical, in this one just remember, pay atention to the root configuration (do not believe the depth on the "digital" osciloscope), always try to draw the profile of the angles in a paper sheet to guide you trough the test. You can use a piece of lead and fold it following the contour of the pipes and welding.
Remember that the RP2X it's just a "recomended practice" but anyhow... some clients ask for it.


 
 Reply 
 

Product Spotlight

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

On Demand Webinar: Using Eddy Current Array for Large Areas in Place of Magnetic Particle and Liquid Penetrant Testing

New on-demand webinar on the use of eddy current array (ECA) technology in lieu of liquid penetrant
...
testing (PT) and magnetic particle testing (MT) for large area screenings. The webinar includes an introduction to the technologies with advantages and disadvantages of each. Side by side examples are discussed including aircraft stringers, engine blades, forgings, weld plates & more. View it today.
>

VeeScan AirCraft Wheel Inspection

The VEESCAN offers maximum flexibility, has a proven mechanical design and records of breakdown-fr
...
ee operation of over 365 days. Appealing to companies in the Aerospace industry, the VEESCAN is ideal for all wheel-testing environments. With a wide selection of probes, the VeeScan allows your wheel testing facility the flexibility to select the most compatible configurations with their workload.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window