where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

3652 views
Technical Discussions
S.R.G.PRABHU
NDT Inspector, AUT AUDITOR/ASNT LEVEL III/AWS SENIOR WELDING INS
India, Joined Sep 2004, 3

S.R.G.PRABHU

NDT Inspector, AUT AUDITOR/ASNT LEVEL III/AWS SENIOR WELDING INS
India,
Joined Sep 2004
3
08:27 Jan-01-2005
API RP 2X- TIPS

Someone please guide me in using API RP2X, with some practical tips in scanning ,T,K,Y joints.What is the normal procedure for passing a client's exam?To pass what is the minmum sizing of a mocked up defect?Is there any other points to note?I am aASNT LEVEL III in UT , but still have to qualify in TKY.
Prabhu


 
 Reply 
 
Collin Maloney
NDT Inspector, - Plant Inspector
Applus RTD, Australia, Joined Nov 2000, 147

Collin Maloney

NDT Inspector, - Plant Inspector
Applus RTD,
Australia,
Joined Nov 2000
147
00:13 Aug-02-2005
Re: API RP 2X- TIPS
----------- Start Original Message -----------
: Someone please guide me in using API RP2X, with some practical tips in scanning ,T,K,Y joints.What is the normal procedure for passing a client's exam?To pass what is the minmum sizing of a mocked up defect?Is there any other points to note?I am aASNT LEVEL III in UT , but still have to qualify in TKY.
: Prabhu
------------ End Original Message ------------

API RP 2X is a procedure that is "For information only" to guide engineers in the selection of NDT acceptance codes. If you want to have practical examples of T,K,Y inspection use AWS D1.1

Cheers



 
 Reply 
 
Ætheling
Ætheling
07:21 Aug-03-2005
Re: API RP 2X- TIPS
There's nothing new to it, RP2X has just one written test and it's the same with or without the T,K,Y certification.
The T,K,Y testing will be practical, in this one just remember, pay atention to the root configuration (do not believe the depth on the "digital" osciloscope), always try to draw the profile of the angles in a paper sheet to guide you trough the test. You can use a piece of lead and fold it following the contour of the pipes and welding.
Remember that the RP2X it's just a "recomended practice" but anyhow... some clients ask for it.


 
 Reply 
 

Product Spotlight

Varex Imaging Large Field of View (FOV) Digital Detector Arrays (DDAs)

A larger FOV DDA can reduce the space and volume of the X-ray inspection system on the factory floor
...
, enable faster scanning times, better throughput and better resolution images at a lower dose. Customers can also save time and money. With these benefits in mind, Varex Imaging has designed a family of large FOV detectors (4343HE, XRD 1611, 4343DX-I, 4343CT) for our industrial imaging customers.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

OPBOX with standard software is able to do all types of inspections and measurements: flaw detection in welds and materials, scanning of objects, testing composite materials, forged and moulded pieces, many UT inspections, measurements of properties of ma

Typical applications: UT measurements with pulse technique, Measurement of thicknesses also at hig
...
h temperatures, Measurements of properties of materials, including fluids and gases We are delivering a standard version of the software (for any Microsoft Windows up to 10 x64 with Microsoft Hardware certification report Approved) and for special needs: SDK with ready to use examples for LabView, MATLAB x64, C++ wrapper for dll, Python and Linux., and also low-level description of how to control our devices directly from any USB tools
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window