where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
321 views
Technical Discussions
Lamura
Lamura
09:37 Aug-10-2005
edge effects

I'm interesting in the problem of modelling the variation of the impedance of a probing coil when the sample placed in front of it (at a generic lift-off distance h) has the same dimensions of the coil. do you know any pubblication on this subject. Could anyone help me?


    
 
 Reply 
 
Changqing Lee
Changqing Lee
04:47 Nov-20-2005
Re: edge effects
This is a common problem in Eddy current testing. One of the general way to model this problem is to use finite element method. A 2D axial simulation or a 3D simulation is doable now for this problem.

If you want to obtain theoretical solution, (like an integral solution for a coil over an infinite plate) for this problem, it is very challenging. Up to now, I dont think any publications on this project are available for the edge effects.

People normally are trying to avoid it. If a coil with a magnetic shielding, the edge effect can be minimized.

Hope this helps.
----------- Start Original Message -----------
: I'm interesting in the problem of modelling the variation of the impedance of a probing coil when the sample placed in front of it (at a generic lift-off distance h) has the same dimensions of the coil. do you know any pubblication on this subject. Could anyone help me?
------------ End Original Message ------------




    
 
 Reply 
 
fds
fds
00:34 Oct-01-2006
Re: edge effects
----------- Start Original Message -----------
: I'm interesting in the problem of modelling the variation of the impedance of a probing coil when the sample placed in front of it (at a generic lift-off distance h) has the same dimensions of the coil. do you know any pubblication on this subject. Could anyone help me?
------------ End Original Message ------------




    
 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window