where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

553 views
Technical Discussions
Chris Wright
Chris Wright
06:39 Aug-08-2005
Tubing wall thickness measurements.

Hi.
I am looking to get a complete picture of wall thickness (i.e 360 degree view all along the length) for many sections of steel pipe with inner diameters ranging from 8.5" to 12.5". I have access to both the inside and outside of the pipe. Ideally, I would like a device which could operate in dry pipe in the store yard, but failing that the pipe could be filled with sea water.
Anyone know of suitable products out there?
Thanks.


 
 Reply 
 
Richard Kazares
Richard Kazares
05:30 Aug-10-2005
Re: Tubing wall thickness measurements.
If you have access to the outside of the wall - our Large Structure Inspecition (LSI) System - can handle the diameter ranges you have given. It can produce the full 360 degree view that you require (C-Scan) - as well as provide statistical data and results. In addition, we have software that can "stitch" individual images together to produce a CONTINUOUS "picture" (with the backup data) of the complete length of pipe (it doesn't matter how long it is) - in ONE view.

I will send you an example of a scanned pipe section via your e-mail.

Feel free to contact me for more information


----------- Start Original Message -----------
: Hi.
: I am looking to get a complete picture of wall thickness (i.e 360 degree view all along the length) for many sections of steel pipe with inner diameters ranging from 8.5" to 12.5". I have access to both the inside and outside of the pipe. Ideally, I would like a device which could operate in dry pipe in the store yard, but failing that the pipe could be filledwith sea water.
: Anyone know of suitable products out there?
: Thanks.
------------ End Original Message ------------




 
 Reply 
 
Carlos Correia
Carlos Correia
09:47 Aug-10-2005
Re: Tubing wall thickness measurements.
I think you can use a B-Scan system and perform a Scan from outside diameter. Ultratek and LeCour have a portable external cards (US BOX) that you can conect to a PC and perform the B-SCAN.
Regards

----------- Start Original Message -----------
: Hi.
: I am looking to get a complete picture of wall thickness (i.e 360 degree view all along the length) for many sections of steel pipe with inner diameters ranging from 8.5" to 12.5". I have access to both the inside and outside of the pipe. Ideally, I would like a device which could operate in dry pipe in the store yard, but failing that the pipe could be filled with sea water.
: Anyone know of suitable products out there?
: Thanks.
------------ End Original Message ------------




 
 Reply 
 
Allan
Allan
03:06 Aug-11-2005
Re: Tubing wall thickness measurements.
You could also utilize an IRIS ultrasonic system (from the ID) using regular water as a couplant. Contact Pan American Industries

----------- Start Original Message -----------
: Hi.
: I am looking to get a complete picture of wall thickness (i.e 360 degree view all along the length) for many sections of steel pipe with inner diameters ranging from 8.5" to 12.5". I have access to both the inside and outside of the pipe. Ideally, I would like a device which could operate in dry pipe in the store yard, but failing that the pipe could be filled with sea water.
: Anyone know of suitable products out there?
: Thanks.
------------ End Original Message ------------




 
 Reply 
 
Natt
Natt
00:04 Aug-17-2005
Re: Tubing wall thickness measurements.
----------- Start Original Message -----------
: Hi.
: I am looking to get a complete picture of wall thickness (i.e 360 degree view all along the length) for many sections of steel pipe with inner diameters ranging from 8.5" to 12.5". I have access to both the inside and outside of the pipe. Ideally, I would like a device which could operate in dry pipe in the store yard, but failing that the pipe could be filled with sea water.
: Anyone know of suitable products out there?
: Thanks.
------------ End Original Message ------------

Please check out for Tubular inspection at www.dacon-inspection.com


 
 Reply 
 
Jim Yukes
Jim Yukes
03:32 Aug-24-2005
Re: Tubing wall thickness measurements.
----------- Start Original Message -----------
: : Hi.
: : I am looking to get a complete picture of wall thickness (i.e 360 degree view all along the length) for many sections of steel pipe with inner diameters ranging from 8.5" to 12.5". I have access to both the inside and outside of the pipe. Ideally, I would like a device which could operate in dry pipe in the store yard, but failing that the pipe could be filled with sea water.
: : Anyone know of suitable products out there?
: : Thanks.
: Please check out for Tubular inspection at www.dacon-inspection.com
------------ End Original Message ------------
Also visit Panamiris.com and look at the IRISPig. It was developed for measuring wall thickness in pipes from the ID.




 
 Reply 
 

Product Spotlight

VOGT Ultrasonics awarded innovation champion

Let go of the old and try something new. VOGT convinced the jury in the 27th round of the TOP 100
...
innovation competition. Our team is very pleased to officially belong to the TOP 100 in Germany!
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window