where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

554 views
Technical Discussions
Chris Wright
Chris Wright
06:39 Aug-08-2005
Tubing wall thickness measurements.

Hi.
I am looking to get a complete picture of wall thickness (i.e 360 degree view all along the length) for many sections of steel pipe with inner diameters ranging from 8.5" to 12.5". I have access to both the inside and outside of the pipe. Ideally, I would like a device which could operate in dry pipe in the store yard, but failing that the pipe could be filled with sea water.
Anyone know of suitable products out there?
Thanks.


 
 Reply 
 
Richard Kazares
Richard Kazares
05:30 Aug-10-2005
Re: Tubing wall thickness measurements.
If you have access to the outside of the wall - our Large Structure Inspecition (LSI) System - can handle the diameter ranges you have given. It can produce the full 360 degree view that you require (C-Scan) - as well as provide statistical data and results. In addition, we have software that can "stitch" individual images together to produce a CONTINUOUS "picture" (with the backup data) of the complete length of pipe (it doesn't matter how long it is) - in ONE view.

I will send you an example of a scanned pipe section via your e-mail.

Feel free to contact me for more information


----------- Start Original Message -----------
: Hi.
: I am looking to get a complete picture of wall thickness (i.e 360 degree view all along the length) for many sections of steel pipe with inner diameters ranging from 8.5" to 12.5". I have access to both the inside and outside of the pipe. Ideally, I would like a device which could operate in dry pipe in the store yard, but failing that the pipe could be filledwith sea water.
: Anyone know of suitable products out there?
: Thanks.
------------ End Original Message ------------




 
 Reply 
 
Carlos Correia
Carlos Correia
09:47 Aug-10-2005
Re: Tubing wall thickness measurements.
I think you can use a B-Scan system and perform a Scan from outside diameter. Ultratek and LeCour have a portable external cards (US BOX) that you can conect to a PC and perform the B-SCAN.
Regards

----------- Start Original Message -----------
: Hi.
: I am looking to get a complete picture of wall thickness (i.e 360 degree view all along the length) for many sections of steel pipe with inner diameters ranging from 8.5" to 12.5". I have access to both the inside and outside of the pipe. Ideally, I would like a device which could operate in dry pipe in the store yard, but failing that the pipe could be filled with sea water.
: Anyone know of suitable products out there?
: Thanks.
------------ End Original Message ------------




 
 Reply 
 
Allan
Allan
03:06 Aug-11-2005
Re: Tubing wall thickness measurements.
You could also utilize an IRIS ultrasonic system (from the ID) using regular water as a couplant. Contact Pan American Industries

----------- Start Original Message -----------
: Hi.
: I am looking to get a complete picture of wall thickness (i.e 360 degree view all along the length) for many sections of steel pipe with inner diameters ranging from 8.5" to 12.5". I have access to both the inside and outside of the pipe. Ideally, I would like a device which could operate in dry pipe in the store yard, but failing that the pipe could be filled with sea water.
: Anyone know of suitable products out there?
: Thanks.
------------ End Original Message ------------




 
 Reply 
 
Natt
Natt
00:04 Aug-17-2005
Re: Tubing wall thickness measurements.
----------- Start Original Message -----------
: Hi.
: I am looking to get a complete picture of wall thickness (i.e 360 degree view all along the length) for many sections of steel pipe with inner diameters ranging from 8.5" to 12.5". I have access to both the inside and outside of the pipe. Ideally, I would like a device which could operate in dry pipe in the store yard, but failing that the pipe could be filled with sea water.
: Anyone know of suitable products out there?
: Thanks.
------------ End Original Message ------------

Please check out for Tubular inspection at www.dacon-inspection.com


 
 Reply 
 
Jim Yukes
Jim Yukes
03:32 Aug-24-2005
Re: Tubing wall thickness measurements.
----------- Start Original Message -----------
: : Hi.
: : I am looking to get a complete picture of wall thickness (i.e 360 degree view all along the length) for many sections of steel pipe with inner diameters ranging from 8.5" to 12.5". I have access to both the inside and outside of the pipe. Ideally, I would like a device which could operate in dry pipe in the store yard, but failing that the pipe could be filled with sea water.
: : Anyone know of suitable products out there?
: : Thanks.
: Please check out for Tubular inspection at www.dacon-inspection.com
------------ End Original Message ------------
Also visit Panamiris.com and look at the IRISPig. It was developed for measuring wall thickness in pipes from the ID.




 
 Reply 
 

Product Spotlight

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

Portable Ground Penetrating Radar - Proceq GP8000

The Proceq GP8000 portable ground penetrating radar instrument is the beginning of a new era in ND
...
T. The outstanding, patented ultra- wideband technology combined with a compact wireless probe delivers unmatched industry performance. Proceq GP8000 is the world’s first large-scale inspection solution that utilizes Augmented Reality in industrial applications.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window