where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1252 views
Technical Discussions
Fred Raco, Jr.
Consultant,
RNDT, Inc., USA, Joined Jul 2002, 24

Fred Raco, Jr.

Consultant,
RNDT, Inc.,
USA,
Joined Jul 2002
24
00:13 Sep-02-2005
Nitrogen filled pressure vessels

Will X-rays have any effect on pressurized nitrogen in a pressure vessel. Mainly, can it increase the temperature of the nitrogen and increase the pressure? I do not think that it will but I have been asked this question by my client and I am now curious. He wants to send me some small spherical vessels that are pressurized to 6500 psi with nitrogen. The welds need radiographed. Any help will be appreciated.


 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
09:35 Sep-03-2005
Re: Nitrogen filled pressure vessels
Dear Fred,

I think there should not be any problem. The ionisation of nitrogen atoms/molecules that takes place will be reversed over a period of time, because it is a closed system.

The image sharpness could however be affected because of the scattering and secondary X-rays.

Swamy

----------- Start Original Message -----------
: Will X-rays have any effect on pressurized nitrogen in a pressure vessel. Mainly, can it increase the temperature of the nitrogen and increase the pressure? I do not think that it will but I have been asked this question by my client and I am now curious. He wants to send me some small spherical vessels that are pressurized to 6500 psi with nitrogen. The welds need radiographed. Any help will be appreciated.
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window