where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1169 views
Technical Discussions
Fred Raco, Jr.
Consultant,
RNDT, Inc., USA, Joined Jul 2002, 24

Fred Raco, Jr.

Consultant,
RNDT, Inc.,
USA,
Joined Jul 2002
24
00:13 Sep-02-2005
Nitrogen filled pressure vessels

Will X-rays have any effect on pressurized nitrogen in a pressure vessel. Mainly, can it increase the temperature of the nitrogen and increase the pressure? I do not think that it will but I have been asked this question by my client and I am now curious. He wants to send me some small spherical vessels that are pressurized to 6500 psi with nitrogen. The welds need radiographed. Any help will be appreciated.


 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
09:35 Sep-03-2005
Re: Nitrogen filled pressure vessels
Dear Fred,

I think there should not be any problem. The ionisation of nitrogen atoms/molecules that takes place will be reversed over a period of time, because it is a closed system.

The image sharpness could however be affected because of the scattering and secondary X-rays.

Swamy

----------- Start Original Message -----------
: Will X-rays have any effect on pressurized nitrogen in a pressure vessel. Mainly, can it increase the temperature of the nitrogen and increase the pressure? I do not think that it will but I have been asked this question by my client and I am now curious. He wants to send me some small spherical vessels that are pressurized to 6500 psi with nitrogen. The welds need radiographed. Any help will be appreciated.
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window