strips. Each system is adapted to the respective customer’s specific environment and optimized for different manufacturing processes.

➤

es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.

➤

enabling higher payloads and unlimited flight time for SKYRON. Additionally, the tether embedded in the tether box is an industrial server for real-time data capturing. The Tether System uses an ultra-light micro flexible cable that eliminates the need to recharge or swap out batteries leading to a shorter inspection time without interfere with inspection capabilities.

➤

ight structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).

➤