ial. The Jutan also provides features of high S/N ratio and narrow deadzone, and it is capable of detecting defects near the surface. There is a wide range of model variations: Cartridge, Case, Flat and Pencil types for various usages such as butt welding or fillet welding parts, narrow groove part, inner and outer surfaces of pipes, gas-cut surface of reinforcing bar, gap of crankshaft and so on. With the Cartridge type, it is easy to change element size and frequency due to its plug-in structure. The JUTAN was released in 2015 at Japan, and its demand has been increasing year by year with Japan and other countries.

➤

udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.

➤

ft operation in both industrial and lab environments. These fully integrated systems provide various scanning configurations and incorporate conventional and phased array ultrasonic technologies to support diverse applications, from inspection of engine disks and HPT (High Pressure Turbine) spools to scanning of bars, shafts, billets and plates. Our automated ultrasonic testing (AUT) systems are approved for use in both production halls and aviation MROs by all major manufacturers, including GE Aviation, RR engines, P&W and others.

➤

oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller. The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy

➤