where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Vallen-Systeme GmbH
The Acoustic Emission Company! Since 1987 Vallen stands for competence and continuity in AE and for reliable business cooperation and support.
327 views
Technical Discussions
Don
Don
00:51 Sep-26-2005
Near surface creeping (Head) wave signals

I am testing steel for small surface breaking cracks (probe side)using 20MHz immersion probes angled at slightly less than the 1st critical angle to produce head waves in the material. The problem is that I only seem to get signals from the crack tips, and not from the surface breaking corner as I would expect. Is this normal for head waves or have I got somthing wrong?


 
 Reply 
 
John Turner
John Turner
03:29 Sep-26-2005
Re: Near surface creeping (Head) wave signals
You have problems with setting up creeping waves this way. The major one is the attenuation of the head wave at 20MHz. It also concerns me that you are using an immersion probe - how are you setting up the beam angle with this?

For further information, please contact Phoenix Inspection Systems.

Regards

John Turner

----------- Start Original Message -----------
: I am testing steel for small surface breaking cracks (probe side)using 20MHz immersion probes angled at slightly less than the 1st critical angle to produce head waves in the material. The problem is that I only seem to get signals from the crack tips, and not from the surface breaking corner as I would expect. Is this normal for head waves or have I got somthing wrong?
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window