where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
549 views
Technical Discussions
Denny Cochrane
Denny Cochrane
02:34 Jun-07-1999
High Speed NDT

Currently, we are using Magnetic Particle Inspection in our heat
treat operation for the detection of quench cracks in automotive
components. Currently, we use an operator to visually inspect
the part, with a less than 100% success rate.

I am looking for alternative (hopefully automated) NDT
techniques which would be able to perform the same function with
a better success rate.

The system would have to be able to cover an area of 0.16 m^2 in
roughly 9 seconds (scanning speed of 18000 mm^2/second).

Any suggestions would be appreciated.


 
 Reply 
 
William G. Klene
William G. Klene
01:35 Jun-08-1999
Re: Response, High Speed NDT
Mr. Cochrane

Could you send Moraine Valley Community College three
or four parts that contain the quench cracks. We have
worked with several Chicago area companies on related
projects. There is no fee. The school works on various
projects so our students can see what goes on the REAL
world of NDT.

Don't know if we can help you out, but are willing
to try. I am the director of the school's NDE
ASSOCIATE OF APPLICED SCIENCE degree program. Please
visit our web site at www.mv.cc.il.us/nde.

Send the parts to: MORAINE VALLEY COMMUNITY COLLEGE
NDE Department
10900 S. 88 Av
Palos Hills, IL 60465

ATT: William G. Klene
Department Manager



 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 304

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
304
08:06 Jun-08-1999
Re: High Speed NDT
: Currently, we are using Magnetic Particle Inspection in our heat
: treat operation for the detection of quench cracks in automotive
: components. Currently, we use an operator to visually inspect
: the part, with a less than 100% success rate.

: I am looking for alternative (hopefully automated) NDT
: techniques which would be able to perform the same function with
: a better success rate.

: The system would have to be able to cover an area of 0.16 m^2 in
: roughly 9 seconds (scanning speed of 18000 mm^2/second).

: Any suggestions would be appreciated.

Danny (and others),
Godfrey Hands Ltd is the UK sales agent for several companies offering Resonant Inspection, specifically for testing automotive components.

These tests are whole body tests that evaluate the surface and internal integrity of components (Crack detection and inclusions) as well as detecting components with incorrect hardness in one test.
Tests take varying times, but generally between 1 and 10 seconds should be considered.

Please see our web pages for more information on Resonant Inspection. http://www.hands-ltd.demon.co.uk

Let me know also where you are located, and I can put you in touch with somebody more local to you than the United Kingdom.


 
 Reply 
 

Product Spotlight

XRHRobotStar

In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
...
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Ultrasonic tomograph for imaging of concrete structures А1040 MIRA

Applicable for concrete inspection allowing imaging of the internal structure of objects from conc
...
rete, reinforced concrete, different stones. The operation applies pulse-echo technique at one-side access to the object. The instrument is feasible for concrete inspection for searching conduct ducts, conduits, detection of foreign inclusions, holes, honeycombing, cracks and other concrete defects.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window