where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
551 views
Technical Discussions
Denny Cochrane
Denny Cochrane
02:34 Jun-07-1999
High Speed NDT

Currently, we are using Magnetic Particle Inspection in our heat
treat operation for the detection of quench cracks in automotive
components. Currently, we use an operator to visually inspect
the part, with a less than 100% success rate.

I am looking for alternative (hopefully automated) NDT
techniques which would be able to perform the same function with
a better success rate.

The system would have to be able to cover an area of 0.16 m^2 in
roughly 9 seconds (scanning speed of 18000 mm^2/second).

Any suggestions would be appreciated.


 
 Reply 
 
William G. Klene
William G. Klene
01:35 Jun-08-1999
Re: Response, High Speed NDT
Mr. Cochrane

Could you send Moraine Valley Community College three
or four parts that contain the quench cracks. We have
worked with several Chicago area companies on related
projects. There is no fee. The school works on various
projects so our students can see what goes on the REAL
world of NDT.

Don't know if we can help you out, but are willing
to try. I am the director of the school's NDE
ASSOCIATE OF APPLICED SCIENCE degree program. Please
visit our web site at www.mv.cc.il.us/nde.

Send the parts to: MORAINE VALLEY COMMUNITY COLLEGE
NDE Department
10900 S. 88 Av
Palos Hills, IL 60465

ATT: William G. Klene
Department Manager



 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 304

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
304
08:06 Jun-08-1999
Re: High Speed NDT
: Currently, we are using Magnetic Particle Inspection in our heat
: treat operation for the detection of quench cracks in automotive
: components. Currently, we use an operator to visually inspect
: the part, with a less than 100% success rate.

: I am looking for alternative (hopefully automated) NDT
: techniques which would be able to perform the same function with
: a better success rate.

: The system would have to be able to cover an area of 0.16 m^2 in
: roughly 9 seconds (scanning speed of 18000 mm^2/second).

: Any suggestions would be appreciated.

Danny (and others),
Godfrey Hands Ltd is the UK sales agent for several companies offering Resonant Inspection, specifically for testing automotive components.

These tests are whole body tests that evaluate the surface and internal integrity of components (Crack detection and inclusions) as well as detecting components with incorrect hardness in one test.
Tests take varying times, but generally between 1 and 10 seconds should be considered.

Please see our web pages for more information on Resonant Inspection. http://www.hands-ltd.demon.co.uk

Let me know also where you are located, and I can put you in touch with somebody more local to you than the United Kingdom.


 
 Reply 
 

Product Spotlight

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window