where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

661 views
Technical Discussions
Mike Hargate
Mike Hargate
04:56 Oct-10-2005
ASME CODE- LPG SPHERES

I wish some indepth information regarding which ASME CODE to use in the construction of LPG Spheres, internal pressures of 25 bar will be seen? Inside Dia 21,200mm , 4989 m3 capacity
Operating Temp +/- 40 Deg C
ASMW VIII DIV 1 or ASME VIII DIV 2?


 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1303

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1303
07:16 Oct-10-2005
Re: ASME CODE- LPG SPHERES
Mike:
I suspect the option you might find most useful for inspection of the welded seams is Code Case 2235-6. This is use of ultrasonics in lieu of radiography.
Contact me for more details.
Ed


----------- Start Original Message -----------
: I wish some indepth information regarding which ASME CODE to use in the construction of LPG Spheres, internal pressures of 25 bar will be seen? Inside Dia 21,200mm , 4989 m3 capacity
: Operating Temp +/- 40 Deg C
: ASMW VIII DIV 1 or ASME VIII DIV 2?
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window